is there any compatable blower lcc

Post Reply
 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Mon. Feb. 26, 2018 10:45 pm

hi guys
is there any compatible blower to use on my Gibraltar lcc?
the part number is 1702G but no one on line seems to have any!!
is there any other one that can be used and will fit and bolt up properly?
thanks

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Tue. Feb. 27, 2018 6:55 am

joeshek wrote:
Mon. Feb. 26, 2018 10:45 pm
hi guys
is there any compatible blower to use on my Gibraltar lcc?
the part number is 1702G but no one on line seems to have any!!
is there any other one that can be used and will fit and bolt up properly?
thanks
Do you have the original blower? If you can find out the size blower needed Grainger or Dayton may have a comparable one. Also what is the bolt pattern on the blower? You might find a blower with a different bolt pattern on the flange where you then drill new holes to attach to your stove.

https://servicesales.com/wp-content/uploads/2015/ ... raltar.pdf
maybe this helps???

 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Tue. Feb. 27, 2018 8:54 am

michaelanthony wrote:
Tue. Feb. 27, 2018 6:55 am
Do you have the original blower? If you can find out the size blower needed Grainger or Dayton may have a comparable one. Also what is the bolt pattern on the blower? You might find a blower with a different bolt pattern on the flange where you then drill new holes to attach to your stove.

https://servicesales.com/wp-content/uploads/2015/ ... raltar.pdf
maybe this helps???
i don't have the original... that's why i was asking i did find the number off that parts list you did post here.. ( thanks ) i was hoping to find some description that listed what the cfm was and stuff but cant seem to find it.. i don't really want anything like a wind tunnel.. just to blow a little heat around
I'm thinking of buying this one.. looks like the bolt pattern might work.. what do you think?
https://www.amazon.com/Dayton-1TDP7-Rectangular-P ... wer++1702G

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Tue. Feb. 27, 2018 3:40 pm

joeshek wrote:
Tue. Feb. 27, 2018 8:54 am
i don't have the original... that's why i was asking i did find the number off that parts list you did post here.. ( thanks ) i was hoping to find some description that listed what the cfm was and stuff but cant seem to find it.. i don't really want anything like a wind tunnel.. just to blow a little heat around
I'm thinking of buying this one.. looks like the bolt pattern might work.. what do you think?
https://www.amazon.com/Dayton-1TDP7-Rectangular-P ... wer++1702G
Only one way to find out, Amazon has a good return policy if it won't do the job. You may want the Vari-Speed contol to go with it.


 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Tue. Feb. 27, 2018 4:41 pm

michaelanthony wrote:
Tue. Feb. 27, 2018 3:40 pm
Only one way to find out, Amazon has a good return policy if it won't do the job. You may want the Vari-Speed contol to go with it.
just ordered the fan and speed control

 
User avatar
SawDustJack
Member
Posts: 116
Joined: Fri. Jan. 15, 2016 6:12 pm
Location: Cape Cod
Hand Fed Coal Stove: Newcastle/Ironhouse;Warm Morning 617a
Coal Size/Type: Stove/Nut

Post by SawDustJack » Tue. Feb. 27, 2018 4:45 pm

Nice, I was just posting about the speed controller. Definitely makes a nice difference! We have the one that is recommended on your amazon post and it works well.

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Tue. Feb. 27, 2018 6:15 pm

Nice... +1

 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Thu. Mar. 01, 2018 3:53 pm

update .. received today.. motor and speed control.. fan flange it too small to bolt to the holes... not a machinist to fabricate anything to work,,,, so i think I'm just going to return it....nothing has been easy for me with this stove!!
anyway just wanted to give an update...


 
Jasmf24
Member
Posts: 36
Joined: Thu. Feb. 01, 2018 10:16 pm
Location: McMurray, PA
Hand Fed Coal Stove: Gibralter MCC, Hitzer 983
Coal Size/Type: Nut
Other Heating: Heat pump, radiant ceilings

Post by Jasmf24 » Thu. Mar. 01, 2018 6:53 pm

I’m looking for a fan for my Gibraltar as well. If you wouldn’t mind, could you please update this thread when you find one?

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Thu. Mar. 01, 2018 7:46 pm

joeshek wrote:
Thu. Mar. 01, 2018 3:53 pm
update .. received today.. motor and speed control.. fan flange it too small to bolt to the holes... not a machinist to fabricate anything to work,,,, so i think I'm just going to return it....nothing has been easy for me with this stove!!
anyway just wanted to give an update...
Easy fix...bolt the blower to a piece of steel big enough to cover the hole in the stove, then bolt the new piece of steel with the blower attached to the stove. Use high temp silicone on all metal joints. You could probably get big enough sheet metal screws and lock washers.

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Thu. Mar. 01, 2018 9:54 pm

J, post your bolt hole "center to center" measurements along w/ the outside flange measurements and I'll find something for ya.

Tag a picture of old fan along w/ that too would be helpful.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”