is there any compatable blower lcc
- joeshek
- Member
- Posts: 58
- Joined: Sun. Dec. 31, 2017 11:25 am
- Location: Hazleton Pa.
- Hand Fed Coal Stove: gibraltar lcc
hi guys
is there any compatible blower to use on my Gibraltar lcc?
the part number is 1702G but no one on line seems to have any!!
is there any other one that can be used and will fit and bolt up properly?
thanks
is there any compatible blower to use on my Gibraltar lcc?
the part number is 1702G but no one on line seems to have any!!
is there any other one that can be used and will fit and bolt up properly?
thanks
- michaelanthony
- Member
- Posts: 4550
- Joined: Sat. Nov. 22, 2008 10:42 pm
- Location: millinocket,me.
- Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
- Hand Fed Coal Furnace: Gold Marc Independence
- Baseburners & Antiques: Home Sparkle 12
- Coal Size/Type: 'nut
- Other Heating: Fujitsu mini split, FHA oil furnace
Do you have the original blower? If you can find out the size blower needed Grainger or Dayton may have a comparable one. Also what is the bolt pattern on the blower? You might find a blower with a different bolt pattern on the flange where you then drill new holes to attach to your stove.
https://servicesales.com/wp-content/uploads/2015/ ... raltar.pdf
maybe this helps???
- joeshek
- Member
- Posts: 58
- Joined: Sun. Dec. 31, 2017 11:25 am
- Location: Hazleton Pa.
- Hand Fed Coal Stove: gibraltar lcc
i don't have the original... that's why i was asking i did find the number off that parts list you did post here.. ( thanks ) i was hoping to find some description that listed what the cfm was and stuff but cant seem to find it.. i don't really want anything like a wind tunnel.. just to blow a little heat aroundmichaelanthony wrote: ↑Tue. Feb. 27, 2018 6:55 amDo you have the original blower? If you can find out the size blower needed Grainger or Dayton may have a comparable one. Also what is the bolt pattern on the blower? You might find a blower with a different bolt pattern on the flange where you then drill new holes to attach to your stove.
https://servicesales.com/wp-content/uploads/2015/ ... raltar.pdf
maybe this helps???
I'm thinking of buying this one.. looks like the bolt pattern might work.. what do you think?
https://www.amazon.com/Dayton-1TDP7-Rectangular-P ... wer++1702G
- michaelanthony
- Member
- Posts: 4550
- Joined: Sat. Nov. 22, 2008 10:42 pm
- Location: millinocket,me.
- Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
- Hand Fed Coal Furnace: Gold Marc Independence
- Baseburners & Antiques: Home Sparkle 12
- Coal Size/Type: 'nut
- Other Heating: Fujitsu mini split, FHA oil furnace
Only one way to find out, Amazon has a good return policy if it won't do the job. You may want the Vari-Speed contol to go with it.joeshek wrote: ↑Tue. Feb. 27, 2018 8:54 ami don't have the original... that's why i was asking i did find the number off that parts list you did post here.. ( thanks ) i was hoping to find some description that listed what the cfm was and stuff but cant seem to find it.. i don't really want anything like a wind tunnel.. just to blow a little heat around
I'm thinking of buying this one.. looks like the bolt pattern might work.. what do you think?
https://www.amazon.com/Dayton-1TDP7-Rectangular-P ... wer++1702G
- joeshek
- Member
- Posts: 58
- Joined: Sun. Dec. 31, 2017 11:25 am
- Location: Hazleton Pa.
- Hand Fed Coal Stove: gibraltar lcc
just ordered the fan and speed controlmichaelanthony wrote: ↑Tue. Feb. 27, 2018 3:40 pmOnly one way to find out, Amazon has a good return policy if it won't do the job. You may want the Vari-Speed contol to go with it.
- SawDustJack
- Member
- Posts: 116
- Joined: Fri. Jan. 15, 2016 6:12 pm
- Location: Cape Cod
- Hand Fed Coal Stove: Newcastle/Ironhouse;Warm Morning 617a
- Coal Size/Type: Stove/Nut
Nice, I was just posting about the speed controller. Definitely makes a nice difference! We have the one that is recommended on your amazon post and it works well.
- michaelanthony
- Member
- Posts: 4550
- Joined: Sat. Nov. 22, 2008 10:42 pm
- Location: millinocket,me.
- Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
- Hand Fed Coal Furnace: Gold Marc Independence
- Baseburners & Antiques: Home Sparkle 12
- Coal Size/Type: 'nut
- Other Heating: Fujitsu mini split, FHA oil furnace
Nice... +1
- joeshek
- Member
- Posts: 58
- Joined: Sun. Dec. 31, 2017 11:25 am
- Location: Hazleton Pa.
- Hand Fed Coal Stove: gibraltar lcc
update .. received today.. motor and speed control.. fan flange it too small to bolt to the holes... not a machinist to fabricate anything to work,,,, so i think I'm just going to return it....nothing has been easy for me with this stove!!
anyway just wanted to give an update...
anyway just wanted to give an update...
-
- Member
- Posts: 36
- Joined: Thu. Feb. 01, 2018 10:16 pm
- Location: McMurray, PA
- Hand Fed Coal Stove: Gibralter MCC, Hitzer 983
- Coal Size/Type: Nut
- Other Heating: Heat pump, radiant ceilings
I’m looking for a fan for my Gibraltar as well. If you wouldn’t mind, could you please update this thread when you find one?
- michaelanthony
- Member
- Posts: 4550
- Joined: Sat. Nov. 22, 2008 10:42 pm
- Location: millinocket,me.
- Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
- Hand Fed Coal Furnace: Gold Marc Independence
- Baseburners & Antiques: Home Sparkle 12
- Coal Size/Type: 'nut
- Other Heating: Fujitsu mini split, FHA oil furnace
Easy fix...bolt the blower to a piece of steel big enough to cover the hole in the stove, then bolt the new piece of steel with the blower attached to the stove. Use high temp silicone on all metal joints. You could probably get big enough sheet metal screws and lock washers.joeshek wrote: ↑Thu. Mar. 01, 2018 3:53 pmupdate .. received today.. motor and speed control.. fan flange it too small to bolt to the holes... not a machinist to fabricate anything to work,,,, so i think I'm just going to return it....nothing has been easy for me with this stove!!
anyway just wanted to give an update...
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
J, post your bolt hole "center to center" measurements along w/ the outside flange measurements and I'll find something for ya.
Tag a picture of old fan along w/ that too would be helpful.
Tag a picture of old fan along w/ that too would be helpful.