Page 1 of 1

Replacing glass

Posted: Fri. Feb. 23, 2018 10:10 am
by New User
My Surdiac 713 has strips of glass 7/8"x7 1/8", can it be replaced with one piece or can I just replace one strip?

Re: Replacing glass

Posted: Fri. Feb. 23, 2018 8:20 pm
by 2001Sierra
You should be able to. My old Buderus had strips of glass. I would put a couple of strips of tape over them all, and then remove the retaining strips. You may have problems finding glass or ceramic thin enough though.

Re: Replacing glass

Posted: Sat. Feb. 24, 2018 9:35 pm
by New User
I didn't even think of the thickness but the glass company was able to provide one. I'm back up and running, thanks!!