Replacing glass

Post Reply
New User
Member
Posts: 28
Joined: Wed. Jan. 17, 2018 8:07 pm
Hand Fed Coal Stove: Surdiac 713
Coal Size/Type: pea anthracite

Post By: New User » Fri. Feb. 23, 2018 10:10 am

My Surdiac 713 has strips of glass 7/8"x7 1/8", can it be replaced with one piece or can I just replace one strip?

User avatar
2001Sierra
Member
Posts: 1913
Joined: Wed. May. 20, 2009 8:09 am
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34
Stove/Furnace Model: Keystoker 90 Chimney Vent
Location: Wynantskill NY, 10 miles from Albany

Post By: 2001Sierra » Fri. Feb. 23, 2018 8:20 pm

You should be able to. My old Buderus had strips of glass. I would put a couple of strips of tape over them all, and then remove the retaining strips. You may have problems finding glass or ceramic thin enough though.

Visit Hitzer Stoves

New User
Member
Posts: 28
Joined: Wed. Jan. 17, 2018 8:07 pm
Hand Fed Coal Stove: Surdiac 713
Coal Size/Type: pea anthracite

Post By: New User » Sat. Feb. 24, 2018 9:35 pm

I didn't even think of the thickness but the glass company was able to provide one. I'm back up and running, thanks!!

mikemonaghan
New Member
Posts: 4
Joined: Mon. Mar. 19, 2018 5:11 pm

Post By: mikemonaghan » Mon. Mar. 19, 2018 5:16 pm

you can do either way. they sell both the large glass and strips at
woodstove-fireplaceglass.com

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”