Manometer setup

Post Reply
 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Mon. Feb. 05, 2018 7:35 am

Is there post anywhere on how to setup and use a manometer for draft measurement? Just ordered one and have no idea how to get started with it.. I ttied search for a post but didn't find anything on how to start from scratch. . Any help would be great
Thanks in advance

 
User avatar
WNY
Member
Posts: 6307
Joined: Mon. Nov. 14, 2005 8:40 am
Location: Cuba, NY
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Contact:

Post by WNY » Mon. Feb. 05, 2018 8:58 pm

A lot of threads on it and discussed quite a bit. actually pretty simple.

Here you go. Here;s the prolly the most popular one, and various other ones. Just read through it and get ideas on mounting, etc...
Manometer Install

 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Tue. Feb. 06, 2018 9:32 am

thank you..... don't know why i couldn't find it but its exactly what I'm looking for


 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Sun. Feb. 11, 2018 8:18 pm

So joe, did you get your manometer all situated? Do you also have a baro?

 
User avatar
joeshek
Member
Posts: 58
Joined: Sun. Dec. 31, 2017 11:25 am
Location: Hazleton Pa.
Hand Fed Coal Stove: gibraltar lcc

Post by joeshek » Tue. Feb. 13, 2018 5:40 am

joeq wrote:
Sun. Feb. 11, 2018 8:18 pm
So joe, did you get your manometer all situated? Do you also have a baro?
Got all my parts still don't have it together yet as I haven't had time with my work schedule.. Don't even have my stove burning since I haven't been home and I have some questions
I'll post when I get it all figured out

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”