Harmand sf250

Post Reply
 
Bullseye54
New Member
Posts: 1
Joined: Sun. Nov. 19, 2017 6:53 pm
Other Heating: Harman sf 250, Jotul tamerack insert

Post by Bullseye54 » Sun. Nov. 19, 2017 7:27 pm

Hello all, Just joined this group and not sure if I'm posting in the right place...
I bought a used SF 250. I plan on using wood and coal.. What is involved in switching between these two fuels? This stove might be an overkill .. The total sq. ft. with the basement will be around 2000 sq feet.. A1950 ranch with almost no insulation.. Any info will help.. I have a Jotul tamarack insert now but no experience with coal.. I will also have to install a chimney..


 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Nov. 19, 2017 8:43 pm

some pix of what/where you are planning to do all this would be real helpful

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”