-
freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Post
by freetown fred » Tue. Nov. 28, 2017 9:15 pm
C, you're burnin BIT--no matter what you use, it's gonna soot up.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Tue. Nov. 28, 2017 9:29 pm
freetown fred wrote: ↑Tue. Nov. 28, 2017 9:15 pm
C, you're burnin BIT--no matter what you use, it's gonna soot up.
I know but the mpd is kinda catching the soot more the the pipe walls. It's difficult for me to take it all apart just to wipe the pipe damper off. When I could just brush the baro flapper off once a week. I can't run it with out something to regulate my chimneys draft.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Tue. Nov. 28, 2017 9:45 pm
I was just posting because of safety concerns i have about the baro with puff backs but ive not had one yet.
-
Lightning
- Site Moderator
- Posts: 14659
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
Post
by Lightning » Tue. Nov. 28, 2017 11:00 pm
I just use my tooth brush to dust off the backside of the baro door once a week
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Tue. Nov. 28, 2017 11:04 pm
Lightning wrote: ↑Tue. Nov. 28, 2017 11:00 pm
I just use my tooth brush to dust off the backside of the baro door once a week
I'm going to order a baro and give it a try I don't think it will hurt anything.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Wed. Nov. 29, 2017 6:42 pm
Barometric damper is ordered.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Thu. Nov. 30, 2017 2:05 pm
Been doing a lot of reading on here the baro should really help. Sounds good how it feeds air to the chimney during high draft instead of it going thru the air vents in my stove.
-
Lightning
- Site Moderator
- Posts: 14659
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
Post
by Lightning » Thu. Nov. 30, 2017 2:42 pm
Yes, that is quite exactly what happens. The benefit is that it keeps your combustion air flow steady instead of variable. This will even out the burn rate of the fuel. Although, using bit coal I would expect there will still be a peak and trough but maybe not quite so dynamic.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Thu. Nov. 30, 2017 3:06 pm
Lightning wrote: ↑Thu. Nov. 30, 2017 2:42 pm
Yes, that is quite exactly what happens. The benefit is that it keeps your combustion air flow steady instead of variable. This will even out the burn rate of the fuel. Although, using bit coal I would expect there will still be a peak and trough but maybe not quite so dynamic.
Definently have the peak.
Been forgetting to mention the stove paperwork states it will over fire with a draft above .06 from experience they are spot on. She gets to hot after about .05 reading.they highly recommend a baro.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Mon. Dec. 04, 2017 4:18 pm
Yesterday it was 60 out and I was still using the mpd. Can't wait till the baro comes.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Tue. Dec. 05, 2017 10:36 pm
First real cold front and the lights go out from high wind.
-
Lightning
- Site Moderator
- Posts: 14659
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
Post
by Lightning » Wed. Dec. 06, 2017 7:26 am
corey wrote: ↑Tue. Dec. 05, 2017 10:36 pm
First real cold front and the lights go out from high wind.
Oh no, did you get power back? When do expect the baro to come in?
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Wed. Dec. 06, 2017 12:33 pm
Lightning wrote: ↑Wed. Dec. 06, 2017 7:26 am
Oh no, did you get power back? When do expect the baro to come in?
Came back on at 7 this morning wind blew a big tree down up on a mountain. Baro will be her middle next week coming from California.
-
corey
- Member
- Posts: 1035
- Joined: Fri. Nov. 14, 2014 11:14 am
- Location: Southwest VA
- Hand Fed Coal Stove: Buck Stove Hybrid
- Coal Size/Type: Eastern KY bituminous
Post
by corey » Fri. Jan. 05, 2018 10:42 pm
Ashley Is keeping up well thru the cold wish i would have got this baro a long time ago.
-
Lightning
- Site Moderator
- Posts: 14659
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
Post
by Lightning » Sat. Jan. 06, 2018 1:46 pm
What are you noticing since having the baro?