Gibraltar SCC Coal Stove Baffle Plate

Post Reply
ron87777
New Member
Posts: 3
Joined: Thu. Apr. 24, 2008 11:09 am
Stove/Furnace Make: Gibraltar scc

Post Thu. Apr. 24, 2008 11:52 am

I have a Gibraltar SCC coal stove, I was wondering if there should be a baffle plate on the inside of the stove just below the 6” stack output. The stove has two L shaped brackets welded inside the stove at the top. When looking at the manual figure A-4: Model SCC it looks like there should be a baffle at the top.

User avatar
coal berner
Member
Posts: 3590
Joined: Tue. Jan. 09, 2007 12:44 am
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Stove/Furnace Make: Electric Furnace Man
Stove/Furnace Model: DF520
Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.

Post Fri. Apr. 25, 2008 3:49 pm

ron87777 wrote:I have a Gibraltar SCC coal stove, I was wondering if there should be a baffle plate on the inside of the stove just below the 6” stack output. The stove has two L shaped brackets welded inside the stove at the top. When looking at the manual figure A-4: Model SCC it looks like there should be a baffle at the top.
Yes all of the stoves should have one Here are a few Places that have Parts

**Broken Link(s) Removed**http://www.woodmanspartsplus.com/catalog.aspx?c_i ... i_id=10402

http://www.hearthstove.com/catalog.html

ron87777
New Member
Posts: 3
Joined: Thu. Apr. 24, 2008 11:09 am
Stove/Furnace Make: Gibraltar scc

Post Sat. Apr. 26, 2008 12:44 am

Coal Berner Thanks for getting back to me. I checked the parts houses listed none of them have one. Do you know if one can be made and what type metal can be used?

Visit Hitzer Stoves

User avatar
coal berner
Member
Posts: 3590
Joined: Tue. Jan. 09, 2007 12:44 am
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Stove/Furnace Make: Electric Furnace Man
Stove/Furnace Model: DF520
Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.

Post Sat. Apr. 26, 2008 4:55 am

ron87777 wrote:Coal Berner Thanks for getting back to me. I checked the parts houses listed none of them have one. Do you know if one can be made and what type metal can be used?
Call the last one on the list They where made out of Cast Iron you gould use 1/4 to 1/2 inch S.S. plate Give the last one a call first I was told there is a old hardware store a few miles from me that as some Parts for these stoves I will check
and let you know I need some for mine anyway I will try this weekend to go there talk to you later :)

ron87777
New Member
Posts: 3
Joined: Thu. Apr. 24, 2008 11:09 am
Stove/Furnace Make: Gibraltar scc

Post Sat. Apr. 26, 2008 7:22 am

Thanks
If I know what size of the plate I might check to see if the local welding shop could make one. Do you know were I could get the measurements or how to measure the inside of the stove to have one made-up? Thank again ron

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”