Does a Fan Produce More Heat or Just Blow the Air Around?
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
I probably should ask an actual physicist this, but here it goes:
Does blowing air onto a hot object (like a coal stove) give you MORE HEAT output from the object, or does the fan just spread that heat around the room?
I have been using a fan, but I hate to use more electricity if it doesn't produce MORE heat; I really don't need to spread it around the room in my specific situation.
I am leaning towards that the heat output is the same whether there's a fan blowing on the metal or not. I'd think how much heat that transfers through metal is a function of the properties of that metal, if everything else is the same. I'm thinking that the fan cannot make more heat transfer through the metal frame of the stove or exhaust pipes. But I'm hoping it would!
Thanks!
-Tony
Does blowing air onto a hot object (like a coal stove) give you MORE HEAT output from the object, or does the fan just spread that heat around the room?
I have been using a fan, but I hate to use more electricity if it doesn't produce MORE heat; I really don't need to spread it around the room in my specific situation.
I am leaning towards that the heat output is the same whether there's a fan blowing on the metal or not. I'd think how much heat that transfers through metal is a function of the properties of that metal, if everything else is the same. I'm thinking that the fan cannot make more heat transfer through the metal frame of the stove or exhaust pipes. But I'm hoping it would!
Thanks!
-Tony
-
- Member
- Posts: 5791
- Joined: Sun. Feb. 17, 2008 1:08 pm
- Location: Harrison, Tenn
- Other Heating: Wishing it was cold enough for coal here....not really
I think it moves it around and maybe makes the room more comfortable. And I think it removes more heat from the box. The cooler the outer surface of the box, the more heat is transferred.
Kevin
Kevin
-
- Member
- Posts: 2270
- Joined: Sun. Sep. 30, 2012 8:20 pm
- Location: Ithaca,NY
OH,OHHH>>>> I got this one. It Depends
-
- Member
- Posts: 5791
- Joined: Sun. Feb. 17, 2008 1:08 pm
- Location: Harrison, Tenn
- Other Heating: Wishing it was cold enough for coal here....not really
Lets put it this way. I have a metal fireplace "box". Yes POS. But people that have them with fans in them like them. Mine does not have a fan. I hate it. My propane fireplace in Maine worked without a fan....turn on the fan it did have and it was great.
YMMV I guess. I think fans work great.
Kevin
YMMV I guess. I think fans work great.
Kevin
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
I agree Waldo. If the stove has fixed air control, pretty much you're just moving heat around. I'm sure taking heat off the surface would allow a faster rate of transfer. Not sure how much faster, if any. However, if the stove has a bi-metallic primary air damper, blowing heat off the stove would cool the stove mass. This would cause the flapper to open, and allow more air, which would create more heat.waldo lemieux wrote:OH,OHHH>>>> I got this one. It Depends
Last edited by oliver power on Sat. Jan. 11, 2014 6:10 pm, edited 1 time in total.
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
I agree with this logic.. Conducting heat from the metal by passing cool air across it should also mean you are conducting more heat from the contents burning inside the stove.. It also makes for better distribution of that heat. BUT, by cooling the metal, the radiant heat may sag a little. Overall I think the fan is goodKLook wrote:The cooler the outer surface of the box, the more heat is transferred.
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
But I do not agree with this logic...
"The cooler the outer surface of the box, the more heat is transferred" ...It could just mean that the air was distributed from that spot and sent elsewhere ...not that more heat was produced.
-Tony
P.S. Again, we all know a fan distributes heat in a room better, but that's not my question. It's whether more heat is extracted form the object.
"The cooler the outer surface of the box, the more heat is transferred" ...It could just mean that the air was distributed from that spot and sent elsewhere ...not that more heat was produced.
-Tony
P.S. Again, we all know a fan distributes heat in a room better, but that's not my question. It's whether more heat is extracted form the object.
Last edited by tony17112acst on Sat. Jan. 11, 2014 5:34 pm, edited 1 time in total.
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
The heat comes from the coal. You would have to watch the stack temperature fall (and/or watch the coal disappearing faster than normal) in order to conclude that more heat is going into the home while air is blowing across the stove.
Last edited by lsayre on Sat. Jan. 11, 2014 5:39 pm, edited 1 time in total.
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
When you turn on your heater in the car as it is warming up for the first time, do you ever wonder: If I put the fan on "high," am I getting more heat, or is it just blowing the existing heat out faster, making it feel cooler, because the heat extracted is now in a larger volume of area. So if you leave the fan on "low" it feels warmer/hotter, because the available heat is concentrated in the smaller volume/area. The available heat didn't seem to change, just that the heat was spread out into a larger/smaller area ...making the small spot you were sampling with your hand/fingers "feel" like there was a difference in temperature.
Last edited by tony17112acst on Sat. Jan. 11, 2014 5:38 pm, edited 1 time in total.
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Simply put, an air stream washes heat off much the same as water will.
Signed,
A. COAL PHYSICIST, PHD
Signed,
A. COAL PHYSICIST, PHD
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
...but that doesn't answer the question. That's the SAME question.McGiever wrote:Simply put, an air stream washes heat off much the same as water will.
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
...I think that would be a good test to answer the question.lsayre wrote:The heat comes form the coal. You would have to watch the stack temperature fall (and/or watch the coal disappearing faster than normal) in order to conclude that more heat is going into the home while air is blowing across the stove.
- tony17112acst
- Member
- Posts: 80
- Joined: Fri. Nov. 04, 2011 8:14 pm
- Location: Grantville, PA
...I don't agree (yet). The rate of transfer of heat doesn't seem like it would go faster just because the surface was cooler. I could be wrong, but I don't think heat acts that way ...it's radiated through a medium as a certain rate, depending on the properties of that medium is how fast it transfers.oliver power wrote: I'm sure taking heat off the surface would allow a faster rate of transfer. Not sure how much faster.
If what you say is true, then we'd get more heat if we put the stove in -200 degrees in space or something, and I'm not convinced that you'd get more heat just because the surface was cooler.
-Tony
Last edited by tony17112acst on Sat. Jan. 11, 2014 5:44 pm, edited 1 time in total.
-
- Member
- Posts: 2270
- Joined: Sun. Sep. 30, 2012 8:20 pm
- Location: Ithaca,NY
I seem to remember something from physics class. That " the greater the differential in temp of water or air on each side of a surface the greater the rate of heat transfer across that surface.I believe that it also flows faster from high density to low. Its all kinda cloudy back there