Manometer Placement (Pic Attached)

IH Cub · Post by **IH Cub** » Sun. Oct. 27, 2013 2:51 pm

I was hoping someone could advise me on where to put a manometer. Can it go after the barometric damper? On my stove, the damper comes a few inches from the stove (no room to put the Mano before the Baro).

Thanks

Picture of my piping

.JPG | 217.3KB | image.jpg

lsayre · Post by **lsayre** » Sun. Oct. 27, 2013 2:57 pm

The manometer needs to go between the stove and the barometric damper.

I'm On Fire · Post by **I'm On Fire** » Sun. Oct. 27, 2013 5:11 pm

Put it right at the stove outlet.

mozz · Post by **mozz** » Sun. Oct. 27, 2013 5:30 pm

Drill a small hole, maybe 1/8", place copper or steel tubing in the hole, this is where the manometer will hook up to so the plastic hose doesn't melt.

Post by **Lightning** » Sun. Oct. 27, 2013 6:59 pm

Heres a link to another mano thread that might help....

Manometer

McGiever · Post by **McGiever** » Sun. Oct. 27, 2013 8:21 pm

No no no, the mano gets mounted on the wall...only insert the metal tube in the pipe...geez guys.