Coalpail.com Forum

Does anyone know where I can find a wiring diagram for this stove? Any help at all would be appreciated.
Thanks!

There's a wiring diagram under the cover of the stoker timer that deals with what's in that box. The 77 otherwise is extremely simple. There's a line hot/neutral going to the fan control for the fan, there is a limit snap switch on the front of the unit under the covers that shuts down the stoker motor if it hits the high limit which is just a hot loop from the timer/relay output -> high limit snap switch -> stoker motor. Let me know what you need to know, there were some differences over the years in how they were wired.

I typically rip all that out and use a combination fan/limit control to control the fan and shut down the stoker under overfiring conditions. You can also add a low temp snap switch to shut the stoker down in the case of an outfire, but, with proper coal and making sure to leave a deep bed of loose ash (only pulling the clinker) outfires don't really happen.

Posted that here a while back in the Bit section.

Here is the file that MG posted earlier

Thanks for the help!!

Welcome and stick around. Search and Read. The Folks here have this nasty habit of helping solve mysteries and questions !