Brunco 150K Question

Post Reply
User avatar
gitrdonecoal
Member
Posts: 491
Joined: Fri. Oct. 16, 2009 4:35 pm
Hot Air Coal Stoker Stove: Keystoker 90
Stove/Furnace Make: USSC
Stove/Furnace Model: Hotblast 1557
Location: Elba, NY

Post Mon. Jan. 14, 2013 4:36 pm

Hi it's been awhile since I posted. Been doing some searching about a brunco forced air furnace. I bought a hotblast back in 2008 like a lot of people did. Tried coal and been burning wood since for obvious reasons. A guy at work has a brunco. I see guys have put ash pan spinners on to add air under the fire. I'm seeing conflicting results of success in burning coal. Would I be wise to stay away from the brunco for coal use? Any suggestions would be great. Thanks
John

Visit Hitzer Stoves

ssettle
New Member
Posts: 14
Joined: Fri. May. 30, 2008 12:25 pm
Stove/Furnace Model: none

Post Wed. Jan. 16, 2013 11:15 am

Mine works very well. I burn hard coal but the manufacturer recommends soft coal. I heat a small ranch and it stays quite comfortable. I have the 120 which was made to burn wood and soft coal. I added a draft to the ash pan door to burn hard coal.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”