Gas Line to Close to Coal / Wood Stove

 
User avatar
JimVanCool82
New Member
Posts: 14
Joined: Sun. Dec. 30, 2012 10:28 pm

Post by JimVanCool82 » Sun. Dec. 30, 2012 11:22 pm

OK
What about This
Lets just Drop it
Been next to one another for 100 years
READ READ READ!!!!!!!!!

Attachments

Screen shot 2012-12-30 at 7.54.19 PM.png
.PNG | 226.8KB | Screen shot 2012-12-30 at 7.54.19 PM.png


 
User avatar
LDPosse
Member
Posts: 564
Joined: Mon. Dec. 19, 2011 11:11 pm
Location: Tower City, PA

Post by LDPosse » Mon. Dec. 31, 2012 12:01 am

Looks like it was the hybrid of the day! :up:

 
User avatar
JimVanCool82
New Member
Posts: 14
Joined: Sun. Dec. 30, 2012 10:28 pm

Post by JimVanCool82 » Mon. Dec. 31, 2012 12:05 am

Just like we have the Coal Fired Nissan Leaf to Make the Tree Huggers happy
They Think Electricity all Comes from the Sun or Wind

 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Mon. Dec. 31, 2012 12:11 am

When electricity was coming around into homes they made a lamp that was sold as a gas/electric lamp . You could turn the light bulb on or use gas... Talk about dangerous ... BOOM!

For the record I still don't trust natural gas in any building.

 
User avatar
JimVanCool82
New Member
Posts: 14
Joined: Sun. Dec. 30, 2012 10:28 pm

Post by JimVanCool82 » Mon. Dec. 31, 2012 12:12 am

Do you trust Propane?

 
User avatar
VigIIPeaBurner
Member
Posts: 2579
Joined: Fri. Jan. 11, 2008 10:49 am
Location: Pequest River Valley, Warren Co NJ
Hot Air Coal Stoker Furnace: Keystoker Koker(down)
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Post by VigIIPeaBurner » Mon. Dec. 31, 2012 12:43 am

Are they still made in this country? Is Ford still manufacturing the Pinto? Live and learn from engineering mistakes.

I trust propane when it's feuling an appliance designed for it. I don't think its wise to have a idle, valved charged line, capped or uncapped, near a burning solid fuel appliance. I've experienced those valves leaking, new and old.

Everyone gets to place their own bets. Trick is to know how much and with who's skin :|

 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Mon. Dec. 31, 2012 12:57 am

JimVanCool82 wrote:Do you trust Propane?
Not really! The only thing I use gases for is welding operations. I'm not a fan of using for anything else. The first thing I did when I bought my house was to call the company that had two large propane tanks on the side of my house and told them to remove them and then I ripped out the lines to the house. I understand it's "selling point" and it quick water heating capabilities but other than that I don't see the fuss. I grew up down the street from a house that blew up from gas. When I was born my folks and me almost died because the pilot light in the apt went out and my dad happened to wake up and smell gas. Just about a year ago a house near me blew up because of gas. And when I say blew up I mean it look like a bomb landed in the house and shot debree 100's of feet away! we are always having gas leaks in Richmond , you can smell it when you drive in the city!

Although NG is fueling the turbines at the power plants right now because it's so cheap from breaking the shale .

I just wondered what went through people's heads when they came up with these stoves or those lamps. I don't even cook with propane In a grill lol.


 
User avatar
I'm On Fire
Member
Posts: 3918
Joined: Thu. Jun. 10, 2010 9:34 am
Location: Vernon, New Jersey
Hand Fed Coal Stove: DS Machines DS-1600 Hot Air Circulator

Post by I'm On Fire » Mon. Dec. 31, 2012 11:05 am

JimVanCool82 wrote:Just like we have the Coal Fired Nissan Leaf to Make the Tree Huggers happy
They Think Electricity all Comes from the Sun or Wind
Get it straight...it comes from magic. Geez.

 
Chiefcamper
Member
Posts: 148
Joined: Fri. Mar. 11, 2011 12:41 pm
Location: Wayne County, Pa.
Other Heating: Mitsubishi Split System Hyper Heat Pump, Jotul GF600DV FreeStanding Propane Fireplace

Post by Chiefcamper » Mon. Dec. 31, 2012 2:12 pm

I'm On Fire wrote:
JimVanCool82 wrote:Just like we have the Coal Fired Nissan Leaf to Make the Tree Huggers happy
They Think Electricity all Comes from the Sun or Wind
Get it straight...it comes from magic. Geez.
And all these years I thought it was coming from the government. So in a way, I was right....... :D :D :D

 
User avatar
JimVanCool82
New Member
Posts: 14
Joined: Sun. Dec. 30, 2012 10:28 pm

Post by JimVanCool82 » Mon. Dec. 31, 2012 5:55 pm

If the gas line was connected to a gas log set in a fireplace "vented or unvented"
Would that not be an open flame? Ok What if there was a leak
My gas stove has 6 open flames.
It has never burst into flames.
By the time that pipe got hot enough there would be no house left
Burning coal is like having 30lbs of Magma you can't control if it gets away its gone
Try turning the coal fire off in an instant
Can a CO Detector shut down a wood/coal stove?
What about Oil Stoves I know oil now is $$$ now
But soon all energy will be priced per BTU
Safety? Not coal or wood for sure, Sorry I know this form is for burning wood/coal
I had a coal stoker all my life a Van Wert And a Simplex They made todays stoves look like a joke
Would I want one Now, NO. However if all went to hell I would burn Wood in a very small stove.
Coal Ash Dust Yum Yum Great for my family and there lungs!!

 
User avatar
Dennis
Member
Posts: 1082
Joined: Sun. Oct. 30, 2011 5:44 pm
Location: Pottstown,Pa
Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
Coal Size/Type: Anthracite/stove size

Post by Dennis » Mon. Dec. 31, 2012 6:10 pm

JimVanCool82 wrote:Burning coal is like having 30lbs of Magma you can't control if it gets away its gone
Try turning the coal fire off in an instant
dump a 5 gal. bucket of dry sand on it,it smothers the fire

 
User avatar
VigIIPeaBurner
Member
Posts: 2579
Joined: Fri. Jan. 11, 2008 10:49 am
Location: Pequest River Valley, Warren Co NJ
Hot Air Coal Stoker Furnace: Keystoker Koker(down)
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Post by VigIIPeaBurner » Mon. Dec. 31, 2012 6:47 pm

Dennis wrote:
JimVanCool82 wrote:Burning coal is like having 30lbs of Magma you can't control if it gets away its gone
Try turning the coal fire off in an instant
dump a 5 gal. bucket of dry sand on it,it smothers the fire
Or coal ash, we tend to have a little of that on hand all the time ;)

 
User avatar
VigIIPeaBurner
Member
Posts: 2579
Joined: Fri. Jan. 11, 2008 10:49 am
Location: Pequest River Valley, Warren Co NJ
Hot Air Coal Stoker Furnace: Keystoker Koker(down)
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Post by VigIIPeaBurner » Mon. Dec. 31, 2012 6:53 pm

JimVanCool82 wrote:If the gas line was connected to a gas log set in a fireplace "vented or unvented"
Would that not be an open flame? Ok What if there was a leak
My gas stove has 6 open flames.
It has never burst into flames.
By the time that pipe got hot enough there would be no house left
Burning coal is like having 30lbs of Magma you can't control if it gets away its gone
Try turning the coal fire off in an instant
Can a CO Detector shut down a wood/coal stove?
What about Oil Stoves I know oil now is $$$ now
But soon all energy will be priced per BTU
Safety? Not coal or wood for sure, Sorry I know this form is for burning wood/coal
I had a coal stoker all my life a Van Wert And a Simplex They made todays stoves look like a joke
Would I want one Now, NO. However if all went to hell I would burn Wood in a very small stove.
Coal Ash Dust Yum Yum Great for my family and there lungs!!
Modern appliances designed to burn gas are fine.

Accidents can be prevented by eliminating risks. Think it all the way through.

 
User avatar
LDPosse
Member
Posts: 564
Joined: Mon. Dec. 19, 2011 11:11 pm
Location: Tower City, PA

Post by LDPosse » Mon. Dec. 31, 2012 7:20 pm

JimVanCool82 wrote:blah blah yadda yadda troll
Jim -

I don't think most people here on the forum are particularly biased against gas. I have literally begged the utility company to run a line down my street and they refuse.

Coal is still less expensive than heating with propane. Some of us just like the ambiance of having a solid fuel appliance, and enjoy the tasks of caring for the fire that will keep you warm all season.
JimVanCool82 wrote:But soon all energy will be priced per btu
Don't bet on it. We're talking about different fuels, from different sources and varying production costs.
JimVanCool82 wrote:Safety? Not coal or wood for sure
Properly installed, these options carry little risk of fire or CO poisoning. No danger with gas? How about a rotted out heat exchanger on a gas furnace? Never saw that one before?

 
User avatar
JimVanCool82
New Member
Posts: 14
Joined: Sun. Dec. 30, 2012 10:28 pm

Post by JimVanCool82 » Mon. Dec. 31, 2012 7:56 pm

Good Point
People burning Coal/Wood tend to be more "With It" as here and now, aware of whats going on.
I find some people can't even light there own pilot now days let alone tend a stove


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”