Chubby Stove Oval to Round Adapter...

Modern and vintage hand fired coal stove are similar to a wood stove and in some cases can burn either. They need to be regulated and fed by hand usually every 12 to 24 hours depending on your usage. They require no power to operate making them ideal for rural settings with long power outages.
User avatar
ONEDOLLAR
Verified Business Rep.
Posts: 1867
Joined: Thu. Dec. 01, 2011 6:09 pm
Hand Fed Coal Stove: 2014 Chubby Prototype
Coal Size/Type: Nut/Anthracite
Location: Sooner Country Oklahoma
Contact:

Post Thu. Oct. 18, 2012 1:03 pm

While surfing around ebay last night I saw this...
**Broken Link(s) Removed**This is obviously a new product and it makes me wonder what else might be around the corner Chubby wise. Think I will give a call to Larry and see what is what. :idea:

If my little Jr needed one I would snap one of these up in a heartbeat. Having owned a stove once that needed an oval to round adapter I would have loved to have had a cast iron one. :)
It is the small things in life that push us over the edge........

Visit Hitzer Stoves

User avatar
tcalo
Member
Posts: 1031
Joined: Tue. Dec. 13, 2011 4:57 pm
Hand Fed Coal Stove: Chubby Coal Stove
Baseburners & Antiques: Our Glenwood 109
Coal Size/Type: Nut Anthracite
Location: Long Island, New York

Post Thu. Oct. 18, 2012 1:11 pm

I just spoke with Larry a few days ago and he told me he just started making cast iron oval to round adaptors for the Chubby stoves. When I purchased my refurbished stove from him in March he supplied me with a steel adaptor that a friend of his made. He told me that he planned on making cast iron adaptors in the near future. Wish they were available last season. Looks like I may be purchasing one soon!

User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range
Location: Downeast , Maine

Post Thu. Oct. 18, 2012 4:32 pm

That's the ticket! Might try that for my cookstove although it might be a 7"to 6" ? Need to measure.

User avatar
nortcan
Member
Posts: 3080
Joined: Sat. Feb. 20, 2010 3:32 pm
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride
Location: Qc Canada

Post Thu. Oct. 18, 2012 10:06 pm

Very well done. Larry is making high grade things and a cast iron adapter is a good complement for a cast iron stove. Probably could fit on many other stoves :idea:
Thanks onedollar for sharing the info :clap:

User avatar
ONEDOLLAR
Verified Business Rep.
Posts: 1867
Joined: Thu. Dec. 01, 2011 6:09 pm
Hand Fed Coal Stove: 2014 Chubby Prototype
Coal Size/Type: Nut/Anthracite
Location: Sooner Country Oklahoma
Contact:

Post Sat. Oct. 20, 2012 5:00 pm

nortcan wrote:Very well done. Larry is making high grade things and a cast iron adapter is a good complement for a cast iron stove. Probably could fit on many other stoves :idea:
Thanks onedollar for sharing the info :clap:
Speaking of fitting other stoves. I spoke with Larry and he will be checking to see if this adapter will fit other stoves as well. He mentioned about going over to Barntable Stove, http://www.barnstablestove.com and check things out with some stoves they have.
It is the small things in life that push us over the edge........

User avatar
echos67
Member
Posts: 626
Joined: Tue. Feb. 22, 2011 7:26 am
Stove/Furnace Make: Glenwood No. 6.
Location: Maryland and Wanting Out !!

Post Sat. Oct. 20, 2012 6:19 pm

ONEDOLLAR

I could use a 6" round to round 90* elbow with a check damper in it if you have any pull with Larry, very nice product he has made though.

Maybe he could recast some Glenwood No 6 parts too ?
Keith V
Glenwood No. 6

User avatar
ONEDOLLAR
Verified Business Rep.
Posts: 1867
Joined: Thu. Dec. 01, 2011 6:09 pm
Hand Fed Coal Stove: 2014 Chubby Prototype
Coal Size/Type: Nut/Anthracite
Location: Sooner Country Oklahoma
Contact:

Post Sat. Oct. 20, 2012 6:27 pm

Keith

Drop Larry an email. [email protected] Can't hurt to ask.... :idea:
It is the small things in life that push us over the edge........

User avatar
nortcan
Member
Posts: 3080
Joined: Sat. Feb. 20, 2010 3:32 pm
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride
Location: Qc Canada

Post Sun. Oct. 21, 2012 11:51 am

echos67 wrote:ONEDOLLAR

I could use a 6" round to round 90* elbow with a check damper in it if you have any pull with Larry, very nice product he has made though.

Maybe he could recast some Glenwood No 6 parts too ?
Very :idea: :idea: idea, it could helps a lot of peoples with an ""all in one part"".

Visit Hitzer Stoves

User avatar
vfw3439
Member
Posts: 153
Joined: Tue. Jun. 19, 2012 5:28 pm
Hand Fed Coal Stove: Fuller & Warren No. 4
Baseburners & Antiques: Glenwood Base Heater No. 8, Crawford Tropic 112, Fuller & Warren No. 4
Coal Size/Type: Stove/Egg Size Anthracite Coal
Stove/Furnace Make: Glenwood Base Heater No. 8
Stove/Furnace Model: Crawford Tropic 112
Location: Central, Massachusetts / Clio, South Carolina
Contact:

Post Wed. Oct. 24, 2012 9:59 pm

ONEDOLLAR wrote:
nortcan wrote:Very well done. Larry is making high grade things and a cast iron adapter is a good complement for a cast iron stove. Probably could fit on many other stoves :idea:
Thanks onedollar for sharing the info :clap:
Speaking of fitting other stoves. I spoke with Larry and he will be checking to see if this adapter will fit other stoves as well. He mentioned about going over to Barntable Stove, http://www.barnstablestove.com and check things out with some stoves they have.
I bought my 1909 Glenwood Baseheater No. 8 from Doug (Owner) of Barnstable Stove in July and could not be happier with his service. Doug stands behind what he sells. He has a very nice graveyard of antique stoves to choose from too.

Chad
CMDR Chad R. Cheras
Post Commander
Veterans of Foreign Wars Post No. 3439

User avatar
Smokeyja
Member
Posts: 1984
Joined: Mon. Nov. 21, 2011 6:57 pm
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Location: Richmond, VA.
Contact:

Post Sun. Nov. 18, 2012 6:55 pm

Dennis just linked me to this. I see the listing for this oval to round adapter has ended. Is this the product that Larry is making? And can I email him and buy one still ? I really want one of these like yesterday! :shock:
Heck I actually might want two!
Josh http://www.stellarsmithing.com
-Glenwood #6 Base heater - Richmond Advance Range -2 Locke stove co. Warm Morning 414A -Deville express - wood parlour stove
Dance of the Blue Ladies --->http://youtu.be/KfzF47S7bFM?list=UUnshvG_vjY7CT9QKfNuB9dg
Mathew 6:33-34

User avatar
ONEDOLLAR
Verified Business Rep.
Posts: 1867
Joined: Thu. Dec. 01, 2011 6:09 pm
Hand Fed Coal Stove: 2014 Chubby Prototype
Coal Size/Type: Nut/Anthracite
Location: Sooner Country Oklahoma
Contact:

Post Sun. Nov. 18, 2012 7:34 pm

Email Larry. He has LOTS of them. I saw them when I was down at the Chubby Factory last week along with lots of other really cool stuff.
It is the small things in life that push us over the edge........

User avatar
Smokeyja
Member
Posts: 1984
Joined: Mon. Nov. 21, 2011 6:57 pm
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Location: Richmond, VA.
Contact:

Post Sun. Nov. 18, 2012 7:38 pm

ONEDOLLAR wrote:Email Larry. He has LOTS of them. I saw them when I was down at the Chubby Factory last week along with lots of other really cool stuff.
Thank you my friend! I will do just that!

Edit: email sent!
Josh http://www.stellarsmithing.com
-Glenwood #6 Base heater - Richmond Advance Range -2 Locke stove co. Warm Morning 414A -Deville express - wood parlour stove
Dance of the Blue Ladies --->http://youtu.be/KfzF47S7bFM?list=UUnshvG_vjY7CT9QKfNuB9dg
Mathew 6:33-34

User avatar
Smokeyja
Member
Posts: 1984
Joined: Mon. Nov. 21, 2011 6:57 pm
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Location: Richmond, VA.
Contact:

Post Mon. Nov. 19, 2012 6:21 pm

I spoke to Larry yesterday and today through email. He sent me photos with measurements and I compared them to the warm morning oval flue outlet. It looks like it is a perfect fit for the WM 414a as well. I am going to buy one and try it out and report. That will open his market to sell to the WM guys as well! It's like Christmas before Christmas :lol:

Here is the WM deminsions if anyone was interested.

http://jjvphotography.com/stove/Warm_morning/Wm6a.JPG

http://jjvphotography.com/stove/Warm_morning/Wm6b.JPG

http://jjvphotography.com/stove/Warm_morning/Wm6c.JPG
Last edited by Smokeyja on Tue. Nov. 20, 2012 10:01 am, edited 2 times in total.
Josh http://www.stellarsmithing.com
-Glenwood #6 Base heater - Richmond Advance Range -2 Locke stove co. Warm Morning 414A -Deville express - wood parlour stove
Dance of the Blue Ladies --->http://youtu.be/KfzF47S7bFM?list=UUnshvG_vjY7CT9QKfNuB9dg
Mathew 6:33-34

User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range
Location: Downeast , Maine

Post Tue. Nov. 20, 2012 7:47 am

Josh, resize those pix so they are easier to see. If you don't have it, check out microsoft power toys resizer. Quick and easy and free. Just a right click and choose your size.

User avatar
Smokeyja
Member
Posts: 1984
Joined: Mon. Nov. 21, 2011 6:57 pm
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Location: Richmond, VA.
Contact:

Post Tue. Nov. 20, 2012 10:03 am

Steve I am doing most of this from my phone . I upload via FTP To my site but I used an email trick so tell me if that is better. The files should be in Kb now instead of mb.
Josh http://www.stellarsmithing.com
-Glenwood #6 Base heater - Richmond Advance Range -2 Locke stove co. Warm Morning 414A -Deville express - wood parlour stove
Dance of the Blue Ladies --->http://youtu.be/KfzF47S7bFM?list=UUnshvG_vjY7CT9QKfNuB9dg
Mathew 6:33-34

Visit Hitzer Stoves

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”