Barometric Damper

 
rberq
Member
Posts: 6299
Joined: Mon. Apr. 16, 2007 9:34 pm
Location: Central Maine
Hand Fed Coal Stove: DS Machine 1300 with hopper
Coal Size/Type: Blaschak Anthracite Nut
Other Heating: Oil hot water radiators (fuel oil); propane

Post by rberq » Fri. Mar. 26, 2021 4:26 pm

coalfan wrote:
Fri. Mar. 26, 2021 3:57 pm
i need a baro. for my new chubby
Field Controls RC Series. I like the version that comes with a tee, black to match my pipe. Sometimes it is hard to fit it into a standard tee -- very tight fit -- but I have always been able to manage it. Lots of places to order it from, just ask Google. Shop around, you may be able to do better on price. This one is 6-inch, make sure you order the right diameter if the Chubby uses different pipe.
.
field.JPG
.JPG | 96.3KB | field.JPG

 
coalfan
Member
Posts: 1702
Joined: Tue. Mar. 12, 2013 3:00 pm
Location: NW ohio
Hand Fed Coal Stove: ds circultor1500 \chubby coal stove
Coal Size/Type: nut/ pea ant.some bit.
Other Heating: kerosene\cold nat. gas

Post by coalfan » Fri. Mar. 26, 2021 4:29 pm

yep 6 inch rear vent on chubby i looked on e bay and amazon for prices and both were with in same range of price , thanx for the info .


 
coalfan
Member
Posts: 1702
Joined: Tue. Mar. 12, 2013 3:00 pm
Location: NW ohio
Hand Fed Coal Stove: ds circultor1500 \chubby coal stove
Coal Size/Type: nut/ pea ant.some bit.
Other Heating: kerosene\cold nat. gas

Post by coalfan » Fri. Mar. 26, 2021 4:31 pm

not to go off topic but we dealt with larry on the chubby and cant say enough on how helpfull that man is .

 
User avatar
oliver power
Member
Posts: 2751
Joined: Sun. Apr. 16, 2006 9:28 am
Location: Near Dansville, NY
Stoker Coal Boiler: KEYSTOKER Kaa-2
Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254

Post by oliver power » Fri. Mar. 26, 2021 11:20 pm

Barometric Damper should work good on a mark series stove.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”