Woodstove
- coalkirk
- Member
- Posts: 5185
- Joined: Wed. May. 17, 2006 8:12 pm
- Location: Forest Hill MD
- Stoker Coal Boiler: 1981 EFM DF520 retired
- Hand Fed Coal Stove: Jotul 507 on standby
- Coal Size/Type: Lehigh anthracite/rice coal
To burn coal properly and safely, you should do it in a stove meant for coal. Coal needs air from underneath, not on top like wood. That means shaker grates and an air inlet under the fire. I have an old Fisher stove that says it's rated for coal but it won't burn in it, at least not anthracite. Bitmuminous may work.
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
See my Fisher Stove thread, I have one also. There is no underfire air source on it, maybe your's is different.coalkirk wrote:To burn coal properly and safely, you should do it in a stove meant for coal. Coal needs air from underneath, not on top like wood. That means shaker grates and an air inlet under the fire. I have an old Fisher stove that says it's rated for coal but it won't burn in it, at least not anthracite. Bitmuminous may work.