New to the Board, New to Coal

Post Reply
 
Ops164
Member
Posts: 34
Joined: Fri. Jan. 13, 2012 9:04 pm
Location: Central PA

Post by Ops164 » Sat. Jan. 14, 2012 9:48 pm

I'm about 30 miles from the SW end of the Southern Field, north of Carlisle. We bought a "rebuilt" Mark III and are still on the steep part of the learning curve.

Glad to find this forum!

Ops164

 
User avatar
freetown fred
Member
Posts: 30300
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sat. Jan. 14, 2012 9:51 pm

Welcome my friend. Any questions you come up with, ask away. ;)

 
User avatar
CoalHeat
Member
Posts: 8862
Joined: Sat. Feb. 10, 2007 9:48 pm
Location: Stillwater, New Jersey
Stoker Coal Boiler: 1959 EFM 350
Hand Fed Coal Stove: Harman Magnafire Mark I
Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
Coal Size/Type: Rice and Chestnut
Other Heating: Fisher Fireplace Insert

Post by CoalHeat » Sat. Jan. 14, 2012 9:51 pm

Welcome!

 
User avatar
ONEDOLLAR
Verified Business Rep.
Posts: 1866
Joined: Thu. Dec. 01, 2011 6:09 pm
Location: Sooner Country Oklahoma
Hand Fed Coal Stove: 2014 Chubby Prototype
Coal Size/Type: Nut/Anthracite
Contact:

Post by ONEDOLLAR » Sat. Jan. 14, 2012 10:54 pm

Ops164

Welcome! The people on this forum are some of the nicest people you will EVER run across. The collective coal burning knowledge and wisdom around here is darn right scary when you think about it.

Again... WELCOME!


 
GA cracker
Member
Posts: 193
Joined: Sun. May. 15, 2011 6:36 am
Location: Williamsport PA
Hand Fed Coal Stove: Harman Mark iii
Coal Size/Type: nut
Other Heating: Central heat and air

Post by GA cracker » Sun. Jan. 15, 2012 8:51 am

I joined back in June, by November these good people had answered most all my questions. Use the search in top right corner, most all info will be helpful. The rest we learn by doing. Some of these people will give you a ph. # as well. Freetown Fred aint mad he just gives direct answers, and besides He aint heavy he's my brother....
Oh yeah, Welcome
Cracker.

 
User avatar
freetown fred
Member
Posts: 30300
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Jan. 15, 2012 8:52 am

:clap: toothy

 
Ops164
Member
Posts: 34
Joined: Fri. Jan. 13, 2012 9:04 pm
Location: Central PA

Post by Ops164 » Mon. Jan. 16, 2012 12:34 am

Thanks, guys.

Ops

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”