Victory 700 Assembly

Post Reply
edscarts
New Member
Posts: 1
Joined: Thu. Sep. 22, 2011 10:31 pm
Stove/Furnace Make: victory
Stove/Furnace Model: 700

Post Thu. Sep. 22, 2011 10:34 pm

I just purchased a victory 700 coal/wood stove that was disassembled. I have figured out the shakers on the bottom but cant seem to assemble the hopper plates. Is there anyone that has a picture of the inside of this stove or a manual.

franco b
Site Moderator
Posts: 8564
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post Fri. Sep. 23, 2011 10:50 am

Isn't this stove a copy of the Franco Belge? If so here is a picture.
Attachments
hopper.jpg

david1912
New Member
Posts: 2
Joined: Wed. Dec. 25, 2013 5:11 pm
Hand Fed Coal Stove: victory 700 coal stove
Coal Size/Type: pee coal

Post Wed. Dec. 25, 2013 5:27 pm

Can you tell me were you or I can get new parts for my victory 700 coal stove I need new grates for it can not get them form the store in Boyertown on rt. 100 they went out of business.

David

[email protected]
P.S.
I have had this stove in my house for 30 years and it can put a lot of heat out.

Visit Hitzer Stoves

User avatar
freetown fred
Member
Posts: 21572
Joined: Thu. Dec. 31, 2009 12:33 pm
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut
Location: Freetown,NY 13803

Post Wed. Dec. 25, 2013 5:34 pm

Welcome to the FORUM my friend & a Merry Christmas to you & yours--be patient--help is not far away :)

User avatar
D-frost
Member
Posts: 535
Joined: Sun. Dec. 08, 2013 7:10 am
Hand Fed Coal Stove: Chubby
Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
Baseburners & Antiques: Herald 'fireside oak'
Coal Size/Type: nut/Reading anthracite, stove/Blaschak
Other Heating: Jotul #118 wood burner
Location: Southern New Hampshire

Post Wed. Dec. 25, 2013 6:26 pm

There is a great parts store in Wakefield, N.H. called "Woodmanspartsplus". If it"s out their, they can get it. Google for their website. Good luck, and Happy Holidays

franco b
Site Moderator
Posts: 8564
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post Wed. Dec. 25, 2013 8:47 pm

If Franco Belge parts fit then no problem.

Visit Hitzer Stoves

User avatar
lewis
Member
Posts: 123
Joined: Thu. Mar. 27, 2008 5:10 am
Stove/Furnace Make: Harman
Stove/Furnace Model: Old Model Magnum
Location: Strong Pa.

Post Wed. Dec. 25, 2013 8:48 pm

They dont

User avatar
tsb
Member
Posts: 1809
Joined: Wed. Jul. 30, 2008 8:38 pm
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II
Baseburners & Antiques: Grander Golden Oak , Glenwood # 6
Coal Size/Type: All of them
Location: Douglassville, Pa

Post Wed. Dec. 25, 2013 9:08 pm

http://www.kringsonline.com/
They didn't close, they just moved a little north on 100.

User avatar
lewis
Member
Posts: 123
Joined: Thu. Mar. 27, 2008 5:10 am
Stove/Furnace Make: Harman
Stove/Furnace Model: Old Model Magnum
Location: Strong Pa.

Post Thu. Dec. 26, 2013 12:53 am

The Stove is 100 % obsolete the only way to get a replacement part would be to locate a service or foundry to recast it. I found one for sale about 8 years ago and bought it for back up parts.
Attachments
IMG_6655.JPG

david1912
New Member
Posts: 2
Joined: Wed. Dec. 25, 2013 5:11 pm
Hand Fed Coal Stove: victory 700 coal stove
Coal Size/Type: pee coal

Post Thu. Dec. 26, 2013 10:05 am

Thanks for your help I found the woodman's partsplus site also I tried to look up the parts for my stove but they didn't find them. I'm going to call them and see if they can get the parts I need. I looked at the parts for the franco belge coal stove and they look like the ones in my stove I will have to ask them about that and see what they say. I don't want to get rid of the stove it is a real good stove and doesn't take much care to jeep it running all day and night. I burn one coal pale a night and one pale a day so that is about 20 lbs. of coal a day and it eats the hole house.

Thanks again

David1923

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”