Anyone out there have any info on my coal stove? My house has a Classic Lion Coal Heater 076-16.
I have a primitive 2 page manual written in very broken English so I assume it was manufactured overseas. I believe it was installed in the 80's according to the CO for the flue installation.
Any Info on Coal Stove - Classic Lion 076-16
I just picked 1 up at a sale. Ihave no paperwork or any info. Called numerous coal stove stores never heard of this stove. Are you using the stove and hows it working 4 u. Would it be possible to make copies of the paperwork you have and mail them to me, I pay all cost. The 1 thing I was told that it was made in France , don't if true.
Thanks Jon
Thanks Jon
- LsFarm
- Member
- Posts: 7383
- Joined: Sun. Nov. 20, 2005 8:02 pm
- Location: Michigan
- Stoker Coal Boiler: Axeman Anderson 260
- Hand Fed Coal Boiler: Self-built 'Big Bertha' SS Boiler
- Baseburners & Antiques: Keystone 11, Art Garland
Hello jk, and jr, welcome to the forum.
The 'roof' heat shield or radiator surface makes this stove look like one of the Surdiac models. You can do a search for 'surdiac' and you may find some info.
For general help, take a couple more photos of the doors, the air controls on the doors or the stove body, the firebox and ashpan. This way we can get an idea of the way it is designed and be able to help you with it.
In general, get a good hot wood fire going, slowly add coal to the wood fire, untill you have a full bed of burning coal. Then add as much coal as you can, the deeper the bed of coal the better.
Shut off all air that goes above the fire, this air is for burning wood, open the air vent that feeds air under the coal grate. Adjust your heat ouput with this under-grate air.
Hope this helps, Greg L
.
The 'roof' heat shield or radiator surface makes this stove look like one of the Surdiac models. You can do a search for 'surdiac' and you may find some info.
For general help, take a couple more photos of the doors, the air controls on the doors or the stove body, the firebox and ashpan. This way we can get an idea of the way it is designed and be able to help you with it.
In general, get a good hot wood fire going, slowly add coal to the wood fire, untill you have a full bed of burning coal. Then add as much coal as you can, the deeper the bed of coal the better.
Shut off all air that goes above the fire, this air is for burning wood, open the air vent that feeds air under the coal grate. Adjust your heat ouput with this under-grate air.
Hope this helps, Greg L
.
- JiminBucks
- Member
- Posts: 131
- Joined: Tue. Oct. 23, 2007 11:21 am
- Location: Upper Bucks Co. PA
I have one of those Lion's , same as the "Ambassor", it's from Belgion I believe, made by EFFEL.. I need to dig up the manuels, I have. Jim
- coal berner
- Member
- Posts: 3600
- Joined: Tue. Jan. 09, 2007 12:44 am
- Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.
- Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
It looks alot like a Franco Belge but with a hood on it or one of these aswell as a Surdiac to
**Broken Link(s) Removed**
**Broken Link(s) Removed**