Harman SF-250 Grates

Post Reply
 
barry c
New Member
Posts: 10
Joined: Sat. Apr. 18, 2009 10:22 pm
Location: Central VT (Upper Valley)
Hand Fed Coal Stove: Harman SF250
Baseburners & Antiques: Kineo 213 base heater

Post by barry c » Sun. Jul. 26, 2009 6:13 pm

I am looking at the used Harman sf-250 that's been over fired burning wood, most of the grates having sag in them.I called the local Harman dealer for a price on new grates and was quoted $9.80 each.Somehow I don't believe that price is correct.
I would think they cost more like $100 apiece.Does anybody know if the mark 3 grates are the same size?
Thanks:
Barry C

 
User avatar
Razzler
Member
Posts: 434
Joined: Wed. Dec. 19, 2007 7:56 pm
Location: Northampton Pa.
Stoker Coal Boiler: EFM DF520
Coal Size/Type: rice

Post by Razzler » Sun. Jul. 26, 2009 7:08 pm

barry c wrote:price on new grates and was quoted $9.80 each.
For that price I would run right up there and get them! :lol: I think they are between $70 and $80 a piece.
barry c wrote:Does anybody know if the mark 3 grates are the same size?
No! The grates in the Mark III are 3" or 4" longer.

 
User avatar
coal berner
Member
Posts: 3600
Joined: Tue. Jan. 09, 2007 12:44 am
Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF

Post by coal berner » Mon. Jul. 27, 2009 2:49 pm

barry c wrote:I am looking at the used Harman sf-250 that's been over fired burning wood, most of the grates having sag in them.I called the local Harman dealer for a price on new grates and was quoted $9.80 each.Somehow I don't believe that price is correct.
I would think they cost more like $100 apiece.Does anybody know if the mark 3 grates are the same size?
Thanks:
Barry C
You may also find grates here for your Harman .

http://www.woodmanspartsplus.com/4866/Stove-Grate ... k-Ash.html


 
barry c
New Member
Posts: 10
Joined: Sat. Apr. 18, 2009 10:22 pm
Location: Central VT (Upper Valley)
Hand Fed Coal Stove: Harman SF250
Baseburners & Antiques: Kineo 213 base heater

Post by barry c » Mon. Jul. 27, 2009 8:30 pm

Thanks for your the replies.
I am going to pick up the stove on Thursday.
I know you guys like photos. (Stove *censored*)

Attachments

sf2503.jpg
.JPG | 6.2KB | sf2503.jpg
sf 250.jpg
.JPG | 46.7KB | sf 250.jpg

 
User avatar
coal berner
Member
Posts: 3600
Joined: Tue. Jan. 09, 2007 12:44 am
Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF

Post by coal berner » Tue. Jul. 28, 2009 11:12 am

barry c wrote:I am looking at the used Harman sf-250 that's been over fired burning wood, most of the grates having sag in them.I called the local Harman dealer for a price on new grates and was quoted $9.80 each.Somehow I don't believe that price is correct.
I would think they cost more like $100 apiece.Does anybody know if the mark 3 grates are the same size?
Thanks:
Barry C
The dealer that gave you the 9.80 each price Must of read the price wrong it will be more like 98.00 each for the grates
or more .

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”