A friend of mine and myself are in the planning stages of starting our own wholesale plywood business. We need to write a business plan and I'm undecided on which computer program to use to write it. Should I use Microsoft Word or maybe even Excel? The plan won't incorporate any graphs or color charts and will be about 8-10 pages long.
Any suggestions?
Writing a Business Plan.
- EarthWindandFire
- Member
- Posts: 1594
- Joined: Sat. Dec. 18, 2010 12:02 pm
- Location: Connecticut
- Hot Air Coal Stoker Furnace: Leisure Line Lil' Heater.
- Other Heating: Oil Furnace and Kerosene Heaters.
- WNY
- Member
- Posts: 6307
- Joined: Mon. Nov. 14, 2005 8:40 am
- Location: Cuba, NY
- Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
- Coal Size/Type: Rice
- Contact:
Depends, Word is great if you have a lot of writing for the plan, formatted pages, etc. Use Excel if you have a lot of calculations.
You can copy the stuff from Excel into Word easily if you need the numbers/calcs, etc.....you might have to use a bit of both, but probably should be done in Word.
You can copy the stuff from Excel into Word easily if you need the numbers/calcs, etc.....you might have to use a bit of both, but probably should be done in Word.
- lowfog01
- Member
- Posts: 3889
- Joined: Sat. Dec. 20, 2008 8:33 am
- Location: Springfield, VA
- Hand Fed Coal Stove: Mark II & Mark I
- Coal Size/Type: nut/pea
Yes, contact your local university or business school? They often have community workshops at no cost to start up businesses. Sometimes they will pair you with a student to work on your business plan as a team. Your county or local government may have something, too. Also the Small Business Administration will have information or sources available for you. I think you will be surprised at what help is available. When I was considering opening a business a couple of years ago, they had it all, the business plan, how to access funding, just about anything I could think of. Good luck, Lisa
- Dennis
- Member
- Posts: 1082
- Joined: Sun. Oct. 30, 2011 5:44 pm
- Location: Pottstown,Pa
- Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
- Coal Size/Type: Anthracite/stove size
Try SCORE also,they have local chapters all over. http://www.score.orglowfog01 wrote:Yes, contact your local university or business school? They often have community workshops at no cost to start up businesses. Sometimes they will pair you with a student to work on your business plan as a team. Your county or local government may have something, too. Also the Small Business Administration will have information or sources available for you. I think you will be surprised at what help is available. When I was considering opening a business a couple of years ago, they had it all, the business plan, how to access funding, just about anything I could think of. Good luck, Lisa
Yes, contact your local university or business school? They often have community workshops at no cost to start up businesses. Sometimes they will pair you with a student to work on your business plan as a team. Your county or local government may have something, too. Also the Small Business Administration will have information or sources available for you. I think you will be surprised at what help is available. When I was considering opening a business a couple of years ago, they had it all, the business plan, how to access funding, just about anything I could think of. Good luck, Lisa
- coaledsweat
- Site Moderator
- Posts: 13767
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Google is your friend, there are plenty of templates for a business plan on the web.
- EarthWindandFire
- Member
- Posts: 1594
- Joined: Sat. Dec. 18, 2010 12:02 pm
- Location: Connecticut
- Hot Air Coal Stoker Furnace: Leisure Line Lil' Heater.
- Other Heating: Oil Furnace and Kerosene Heaters.
Thanks everyone for the great suggestions!
Has anyone used Microsoft MapPoint?
Has anyone used Microsoft MapPoint?