Building a two car Garage from Pallet Racking

 
User avatar
warminmn
Member
Posts: 7119
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, lignite
Other Heating: Wood and wear a wool shirt

Post by warminmn » Mon. Nov. 28, 2022 9:02 am

Thats for sure! It looks like you do need more shelves, lol


 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Tue. Nov. 29, 2022 5:26 am

I have to take a break from my erection. ha ha. As mentioned previously I bought a lot more uprights and beams and told the guy I would be there the week after Thanksgiving to dismantle and remove so yesterday I spent the day literally dirty and dusty dismantling beams preparing so that when I have help, I can remove and load the uprights. I expect to work today and tomorrow removing the beams and go back over the weekend to remove and load the uprights.
I delete all the pictures from my phone pretty much after I put them on my computer. The guy I bought the shelves from was asking for a picture of my project. I took this one this morning in the dark.
IMG_8925.jpeg
.JPEG | 356.1KB | IMG_8925.jpeg

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Fri. Dec. 02, 2022 5:18 pm

Mixed and poured some piers today.

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Mon. Dec. 05, 2022 4:31 pm


 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Tue. Dec. 06, 2022 1:49 pm


 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Dec. 10, 2022 11:56 am

IMG_8968.jpeg
.JPEG | 1.1MB | IMG_8968.jpeg

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Dec. 10, 2022 12:21 pm



 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Dec. 10, 2022 2:38 pm

IMG_8969.jpeg
.JPEG | 895.3KB | IMG_8969.jpeg
IMG_8970.jpeg
.JPEG | 929.7KB | IMG_8970.jpeg

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sun. Dec. 11, 2022 1:35 pm


 
User avatar
warminmn
Member
Posts: 7119
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, lignite
Other Heating: Wood and wear a wool shirt

Post by warminmn » Sun. Dec. 11, 2022 4:26 pm

Snow means a day off when working on steel! lol Its coming along nice.

 
User avatar
freetown fred
Member
Posts: 29811
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Dec. 11, 2022 9:25 pm

Yep, tough keepin an erection up with snow on the ground C!!! :o :roll: :lol:

 
nut
Member
Posts: 325
Joined: Wed. Aug. 28, 2019 1:54 pm
Location: NEPA
Hand Fed Coal Stove: Glacier Bay
Coal Size/Type: nut
Other Heating: electric

Post by nut » Sun. Dec. 11, 2022 9:37 pm

And with snow on the roof.

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Dec. 17, 2022 4:02 pm

[media] [/media]

 
User avatar
davidmcbeth3
Member
Posts: 6119
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Sat. Dec. 17, 2022 4:19 pm

If those welds are pro-grade then I'm a pro kek

 
ColdHouse
Member
Posts: 604
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Dec. 17, 2022 4:54 pm

davidmcbeth3 wrote:
Sat. Dec. 17, 2022 4:19 pm
If those welds are pro-grade then I'm a pro kek
Please explain.


Post Reply

Return to “House, Gardening & DIY Projects”