Ready 4 Break in Firing
- wilder11354
- Member
- Posts: 1221
- Joined: Sat. Jan. 29, 2011 10:48 pm
- Location: Montrose, Pa.
- Hand Fed Coal Boiler: Harman SF260 Boiler
- Hand Fed Coal Stove: Hitzer 50-93
- Coal Size/Type: nut or pea, anthracite
- Other Heating: crown oil boiler, backup.if needed
Builds not done... just to point where firing it, and then adjusting, tweaking other functions of action which can only be done by firing.
After function tests/adjustments...then its to blending/filing,/stoneing/sanding for form beauty of looks blending of parts.- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Hey Bill, don't shoot your eye out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- davidmcbeth3
- Member
- Posts: 8505
- Joined: Sun. Jun. 14, 2009 2:31 pm
- Coal Size/Type: nut/pea/anthra
freetown fred wrote:Hey Bill, don't shoot your eye out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hey, he did not build a Glock !
https://youtu.be/CbgrioNpJSA?t=585
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Hell DM, I thought it was a DAISY!!
- wilder11354
- Member
- Posts: 1221
- Joined: Sat. Jan. 29, 2011 10:48 pm
- Location: Montrose, Pa.
- Hand Fed Coal Boiler: Harman SF260 Boiler
- Hand Fed Coal Stove: Hitzer 50-93
- Coal Size/Type: nut or pea, anthracite
- Other Heating: crown oil boiler, backup.if needed
Hey got both eyes... friking thing is LOUD, didn't put ear protection on. one bullet in mag chambered fine. Fired.... case ejects at about 3 o'clock, muzzles 12o'clock, pistol grips 6 o clock, top of slide 12 o clock ground 6 o clock about 2 oclock up ejection. Good deal. fire pin strikes pretty much center on primers. next clip three rounds... all about same, slide locks empty mag in rear position, last mag, 6 rounds... all still good,, no stove pipe issues, not over head/in face shell ejections. Satisfied with what it does. Still need to tear down, inspection barrel/slide shroud contact points, and slide lug/stop pin markings. Happy, its a working fully functional firearm. YEAAAAAAAAA!!!!!!
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Outstanding my friend!