Ready 4 Break in Firing

Post Reply
 
User avatar
wilder11354
Member
Posts: 1174
Joined: Sat. Jan. 29, 2011 10:48 pm
Location: Montrose, Pa.
Hand Fed Coal Boiler: Harman SF260 Boiler
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Post by wilder11354 » Tue. May. 30, 2017 10:48 pm

Builds not done... just to point where firing it, and then adjusting, tweaking other functions of action which can only be done by firing.
IMG_20170530_222937.jpg
.JPG | 120.3KB | IMG_20170530_222937.jpg
IMG_20170530_223002.jpg
.JPG | 131.2KB | IMG_20170530_223002.jpg
IMG_20170530_223032.jpg
.JPG | 132.5KB | IMG_20170530_223032.jpg
IMG_20170530_223055.jpg
.JPG | 130.4KB | IMG_20170530_223055.jpg
After function tests/adjustments...then its to blending/filing,/stoneing/sanding for form beauty of looks blending of parts.

 
User avatar
freetown fred
Member
Posts: 25164
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Wed. May. 31, 2017 2:58 am

Hey Bill, don't shoot your eye out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;)

 
User avatar
davidmcbeth3
Member
Posts: 5568
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Wed. May. 31, 2017 3:32 am

freetown fred wrote:Hey Bill, don't shoot your eye out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;)

Hey, he did not build a Glock !

https://youtu.be/CbgrioNpJSA?t=585

Advertise on Coalpail.com

 
User avatar
freetown fred
Member
Posts: 25164
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Wed. May. 31, 2017 4:46 am

Hell DM, I thought it was a DAISY!! ;)

 
User avatar
wilder11354
Member
Posts: 1174
Joined: Sat. Jan. 29, 2011 10:48 pm
Location: Montrose, Pa.
Hand Fed Coal Boiler: Harman SF260 Boiler
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Post by wilder11354 » Wed. May. 31, 2017 8:39 pm

Hey got both eyes... friking thing is LOUD, didn't put ear protection on. one bullet in mag chambered fine. Fired.... case ejects at about 3 o'clock, muzzles 12o'clock, pistol grips 6 o clock, top of slide 12 o clock ground 6 o clock about 2 oclock up ejection. Good deal. fire pin strikes pretty much center on primers. next clip three rounds... all about same, slide locks empty mag in rear position, last mag, 6 rounds... all still good,, no stove pipe issues, not over head/in face shell ejections. Satisfied with what it does. Still need to tear down, inspection barrel/slide shroud contact points, and slide lug/stop pin markings. Happy, its a working fully functional firearm. YEAAAAAAAAA!!!!!! :clap: :yes:

 
User avatar
freetown fred
Member
Posts: 25164
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Wed. May. 31, 2017 9:16 pm

Outstanding my friend! :)

Post Reply

Return to “Hobbies, Hunting, Fishing & Camping”