Bushing Fitted

Post Reply
 
User avatar
wilder11354
Member
Posts: 1221
Joined: Sat. Jan. 29, 2011 10:48 pm
Location: Montrose, Pa.
Hand Fed Coal Boiler: Harman SF260 Boiler
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Post by wilder11354 » Sat. Mar. 25, 2017 8:38 am

Bushing has been fitted. last 1/16 turn to lock it is snug. Yet that will be ok, positive lock up plus with time it will loosen up some.
IMG_20170325_082148.jpg

good snug fit, without being tight. will need a bushing wrench for this.

.JPG | 64.2KB | IMG_20170325_082148.jpg
Barrel sticks out, thats because shroud on barrel is now needing to be fitted for width to slide, then shroud length will have to be adjusted for barrel going into battery(lock-up). Width first, then slowly do shroud length, while checking lock lugs on barrel to slide lug recess points.
IMG_20170325_082211.jpg

shrouds just a bit to wide to fit slide opening width. Several thousands on each side need to be removed.

.JPG | 71.6KB | IMG_20170325_082211.jpg


Post Reply

Return to “Hobbies, Hunting, Fishing & Camping”