Yes, that or one of their semi-fitted barrels. I chose a semi-fitted, and I still ended up having a gunsmith hone and fit it for me because it was well oversized for my (made to be tight fitting) Gold Cup. I ended up with the same precision fitted end result, but my barrel cost was lower up front. It may have dropped right into a more loose standard dimension slide, but I doubt it.wilder11354 wrote:you meaning something like this? http://shopwilsoncombat.com/Match-Grade-Barrel-45-ACP-Full-Size-5-Stainless/productinfo/33G/lsayre wrote:I recommend a Wilson barrel. That, or a Bar-Sto.
45ACP Build
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
-
- Member
- Posts: 2270
- Joined: Sun. Sep. 30, 2012 8:20 pm
- Location: Ithaca,NY
shows how much I know about guns. I thought you were building a rifle....wilder11354 wrote:Checked any hart website.. long arm parts.... not a pistol MFG of custom parts...THX!!!waldo lemieux wrote:Wildman I might have an in for you with a Hart barrel.... wifes maid of honor is wife of owner of Hart.
- coaledsweat
- Site Moderator
- Posts: 13763
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Wilson has a one hundred barrel minimum order, just so you know.
- coaledsweat
- Site Moderator
- Posts: 13763
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
That's what I heard. Maybe custom orders?
- wilder11354
- Member
- Posts: 1221
- Joined: Sat. Jan. 29, 2011 10:48 pm
- Location: Montrose, Pa.
- Hand Fed Coal Boiler: Harman SF260 Boiler
- Hand Fed Coal Stove: Hitzer 50-93
- Coal Size/Type: nut or pea, anthracite
- Other Heating: crown oil boiler, backup.if needed
Many internal parts.... gathering them up. Machining also... tooling or good measuring and accurate numbers to machine from. the quest proceeds.
- davidmcbeth3
- Member
- Posts: 8505
- Joined: Sun. Jun. 14, 2009 2:31 pm
- Coal Size/Type: nut/pea/anthra
Not done yet?wilder11354 wrote:Many internal parts.... gathering them up. Machining also... tooling or good measuring and accurate numbers to machine from. the quest proceeds.
Better get them made before the demorats decide that the .45 is too powerful for mere us to own.