John Deere 318
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
Many of you know I inherited my grandmothers 1997 Suburban and have been putting it back to work with some minor repairs. Well, I also ended up with her 1984 John Deere 318. This machine was purchased new, dealer serviced, and always parked inside. You would never guess it has almost 2000 hrs on it.
I had the boys start mowing with it and have had some minor problems with it. I will follow up with some updates as I work through the issues.
I had the boys start mowing with it and have had some minor problems with it. I will follow up with some updates as I work through the issues.
Attachments
- oros35
- Member
- Posts: 476
- Joined: Mon. Feb. 02, 2009 3:47 pm
- Location: Pittsburgh Pa
- Hand Fed Coal Boiler: Cozeburn OWB burning Bit
- Baseburners & Antiques: 1912 Smith & Anthony Hub Heater #215
They are amazing machines. Durable as they come. My dad has 4 of them and I have a 420, larger brother to the 318.
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
First issue I had was a misfire. Cured that by tightening a loose screw on the condenser. Adjusted the points and replaced the original plug wires for good measure.
Next issue, excessive oil consumption. Read through service records and see that last change was the first time the engine ever saw 10w-30 instead of straight 30. Manual recommends straight 40 or 15w-40 for hot weather, so I made good use of the 1/2 gallon of 15w-40 I had on hand. Mowed 4 hrs, no oil consumption - great.
Got some heavy rains and grass got a bit tall, mowed for 1/2 hour in 90 degree weather and started to see blue smoke blowing out front grill. By the time I got back to the shop the smoke was unreal. Diagnosis is loose bolts on the oil filter adaptor and a blown gasket. Oil was spraying on the cylinder head, lucky it did not catch on fire.
Parts on order, and cleaning the cooling fins in the meantime. I will also adjust the valves since there is no evidence it has ever been done.
Next issue, excessive oil consumption. Read through service records and see that last change was the first time the engine ever saw 10w-30 instead of straight 30. Manual recommends straight 40 or 15w-40 for hot weather, so I made good use of the 1/2 gallon of 15w-40 I had on hand. Mowed 4 hrs, no oil consumption - great.
Got some heavy rains and grass got a bit tall, mowed for 1/2 hour in 90 degree weather and started to see blue smoke blowing out front grill. By the time I got back to the shop the smoke was unreal. Diagnosis is loose bolts on the oil filter adaptor and a blown gasket. Oil was spraying on the cylinder head, lucky it did not catch on fire.
Parts on order, and cleaning the cooling fins in the meantime. I will also adjust the valves since there is no evidence it has ever been done.
Attachments
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Yep---thanx grandmom!!!!
-
- Member
- Posts: 2684
- Joined: Fri. Jan. 26, 2007 9:55 pm
- Location: Birdsboro PA.
- Stoker Coal Boiler: EFM 350
- Hot Air Coal Stoker Furnace: reading allegheny stoker
- Hot Air Coal Stoker Stove: alaska kodiak stoker 1986. 1987 triburner, 1987 crane diamond
- Coal Size/Type: rice
Nice garden tractor!
I have a collection of narrow frame cub cadets. one was my pop pops.
I have a collection of narrow frame cub cadets. one was my pop pops.
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
Valves adjusted and engine mostly reassembled. The valves were definitely overdue for adjustment. The intakes were loose and the exhaust was too tight. The engine is spotless inside with minimal carbon buildup.
Still waiting for one part, but should have it back in action soon.
Still waiting for one part, but should have it back in action soon.
Attachments
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
I just finished a “qualifying run” in the orchard with the freshly assembled 318. Prior to mowing I degreased the engine and frame, and treated the gas with a fuel additive to help remove any carbon from the combustion chambers.
I ran it hard and so far everything sounds good and I don’t see any leaks. The exhaust fumes are another story. After about 5 minutes of mowing the fumes really started to stink, and by the end the muffler and side panel were black with soot. I think I will have to mow perpendicular to the wind for this tank of gas.
I ran it hard and so far everything sounds good and I don’t see any leaks. The exhaust fumes are another story. After about 5 minutes of mowing the fumes really started to stink, and by the end the muffler and side panel were black with soot. I think I will have to mow perpendicular to the wind for this tank of gas.
Attachments
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Hey Rob--howv do ya DECREASE a frame!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Whoops!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
I used my board stretcher in reverse.freetown fred wrote: ↑Wed. Aug. 03, 2022 3:07 pmHey Rob--howv do ya DECREASE a frame!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Hmmmmm, OK, I can see it now!!!
-
- Member
- Posts: 5997
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
Always wanted a 318. The 214 isn’t bad though. Just put all new deck bearings in and other minor engine work my son did, and did a nice job too. We should probably run a tank or two of some type of fuel system cleaner as well.
Never seen that kind before. Any other suggestions?
Never seen that kind before. Any other suggestions?
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Marvel Mystery Oil has been workin fo eons Billy!!!
- Rob R.
- Site Moderator
- Posts: 17980
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
Marvel Mystery Oil (MMO) is a good choice to keep things clean, but I think the Schaeffer product is more aggressive at removing old carbon deposits. I had already run a few tanks of gas treated with MMO through this 318 before I used the Schaeffer product.freetown fred wrote: ↑Tue. Aug. 30, 2022 5:04 pmMarvel Mystery Oil has been workin fo eons Billy!!!
One other note on MMO - another member reported good results with MMO eliminating off-season corrosion issues from poor quality gasoline in antique carburetors. I treat all of the gas that goes in my zero turn with MMO (have been doing it since it was new).