I have a mixed science background, but I'm stumped on this one.
For a school project, my son is looking for LED lights that can be seen by a thermal imager. But, they must look to the person using the thermal imager like an extremely bright light, almost like a flashlight in intensity.
Any suggestions or thoughts?
LED Lights That Can Be Seen by a Thermal Imager?
- EarthWindandFire
- Member
- Posts: 1594
- Joined: Sat. Dec. 18, 2010 12:02 pm
- Location: Connecticut
- Hot Air Coal Stoker Furnace: Leisure Line Lil' Heater.
- Other Heating: Oil Furnace and Kerosene Heaters.
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
As a rule, LED bulbs are cool, so they would not present a very bright thermal image. Their bases get hot though.
- EarthWindandFire
- Member
- Posts: 1594
- Joined: Sat. Dec. 18, 2010 12:02 pm
- Location: Connecticut
- Hot Air Coal Stoker Furnace: Leisure Line Lil' Heater.
- Other Heating: Oil Furnace and Kerosene Heaters.
Thanks Larry!
They do make IR LED's that emit only infrared light. But, I'm not sure that's the best method for this attempted application.
What wavelength of light could be seen best by a Thermal Imager during a fire, for example?
They do make IR LED's that emit only infrared light. But, I'm not sure that's the best method for this attempted application.
What wavelength of light could be seen best by a Thermal Imager during a fire, for example?
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
Not sure. Something with a low 'effective' temperature and thereby a long wavelength would be my guess. IR fits that bill.
- Black_And_Blue
- Member
- Posts: 1303
- Joined: Sun. Dec. 21, 2008 12:09 pm
- Location: a rock and a hard place
- Hot Air Coal Stoker Stove: Alaska 140
Hmmm, I know infrared LED can be seen with a cell phone camera but I think you are asking the other way round.....
I found a standard bulb flashlight and set it next to the LEDs I have then took a thermal image. The 10mm, 12V "very bright" LED's barely registered on the image, didn't matter which color LED. I tried red, purple, blue and green. An example is below...The flashlight is on the right and the barely seen blip on the left sitting on the battery is the LED.
From a spool of flexible led strip I have 6 green LED's in the next picture. These show up better. The flashlight is on right and the LED strip is on the left. I suspect it is the components on the strip giving off heat that the imager is picking up rather than the LED's themselves.
From a spool of flexible led strip I have 6 green LED's in the next picture. These show up better. The flashlight is on right and the LED strip is on the left. I suspect it is the components on the strip giving off heat that the imager is picking up rather than the LED's themselves.