RIE

Post Reply
 
hophead
Member
Posts: 330
Joined: Tue. Jun. 03, 2008 8:00 pm
Location: Sch County

Post by hophead » Mon. Oct. 17, 2022 9:18 am

Anyone buy and try this coal? 260 a ton I've heard.

 
Farmer6
Member
Posts: 35
Joined: Wed. Mar. 30, 2016 8:14 pm
Location: Northwest York Co. PA
Stoker Coal Boiler: EFM DF 520
Hand Fed Coal Boiler: Retired Franco Belge 92,000 BTU
Other Heating: oil

Post by Farmer6 » Mon. Oct. 17, 2022 10:20 am

RIE bought the old Direnzo coal breaker Price is $260.00 picked up.

 
hophead
Member
Posts: 330
Joined: Tue. Jun. 03, 2008 8:00 pm
Location: Sch County

Post by hophead » Mon. Oct. 17, 2022 10:30 am

Ok, 260 but is it the equal of Direnzos who had great coal in my opinion.


 
jschaefer7406
Member
Posts: 118
Joined: Wed. Dec. 29, 2010 1:42 am

Post by jschaefer7406 » Mon. Oct. 24, 2022 7:27 pm

hophead wrote:
Mon. Oct. 17, 2022 10:30 am
Ok, 260 but is it the equal of Direnzos who had great coal in my opinion.
Agreed, I used to drive about an hour and a half for their coal. Low ash and high heat! :)

I’m also curious if RIE will compare. Speaking with them, it appears they only purchased the property and not the entire operation. So who knows how the product compares…

Anyone?

Joe

 
hank2
Member
Posts: 846
Joined: Sat. Dec. 10, 2011 4:07 pm
Location: Berks County
Hand Fed Coal Stove: DS Machine 1400 WH ciculator; 1880's small cannon in reserve
Coal Size/Type: Nut
Other Heating: small New Yorker oil fired boiler; mostly used for domestic HW

Post by hank2 » Mon. Oct. 24, 2022 11:15 pm

jschaefer7406 wrote:
Mon. Oct. 24, 2022 7:27 pm
Agreed, I used to drive about an hour and a half for their coal. Low ash and high heat! :)

I’m also curious if RIE will compare. Speaking with them, it appears they only purchased the property and not the entire operation. So who knows how the product compares…

Anyone?

Joe
I would guess that they're going to use at least some of their blend from the RIE RS&W mine nearby. Maybe they did beforehand?

I used Direnzo for two heating seasons, but it was so long ago that it's not of much use. Maybe 7 to 9 years ago.
First year was just fine, moderate ash and good burn quality. Second year was Very high ash and a real pain. Both years, it was very clean coal and actually properly sized for nut. In 2003, Direnzo had taken legal action against the Commonwealth of Pa., trying to get the legal limit for ash content in Anthracite as a state vendor raised substantially. Didn't work. They were shut down mostly since last Spring and recently opened under RIE ownership, so hopefully someone that's bought some recently and tried it can report. That price will beat many, very badly.

"We note that the Anthracite Standards Law, Act of May 31, 1947, P.L. 368, as amended, 73 P.S. §§ 261-269, which was enacted by the General Assembly for the protection of consumers and trade purchasers in the purchase of anthracite for fuel purposes, identifies “Standard Anthracite” as anthracite which does not exceed an ash content of:  11% for anthracite the size of egg, stove, and nut;  12% for anthracite the size of pea;  and 13% for anthracite the size of buckwheat and rice.   Section 2(g) of the Anthracite Standards Law, 73 P.S. § 262(g).  “Ash Content” is defined as “the percentage which the weight of the ash from anthracite, resulting from burning, bears to the weight of the anthracite before burning after the anthracite has been dried for one hour at 105 degrees centigrade.”   Section 2(h) of the Anthracite Standards Law, 73 P.S. § 262(h)."

 
hophead
Member
Posts: 330
Joined: Tue. Jun. 03, 2008 8:00 pm
Location: Sch County

Post by hophead » Tue. Oct. 25, 2022 8:38 am

I'd love to see the ash inspection reports. I've been burning coal for 60 plus years and in that time maybe one or two loads have hit that mark. Mine is loaded with rock and most of those I talk to say the same. 13% for rice. Bahhhaa.

Post Reply

Return to “Coal Prices & Quality, Coal Dealer Inquiries & Reviews”