Direnzo Coal in Pottsville,PA

 
User avatar
Darren L
Member
Posts: 78
Joined: Sun. Feb. 13, 2011 9:52 am
Location: Douglassville,Pa
Hot Air Coal Stoker Furnace: Leisure Line
Coal Size/Type: Rice
Contact:

Post by Darren L » Fri. Sep. 30, 2011 5:08 pm

has anybody had any luck with this company getting my stoker on Saturday and trying to find a supplier.


 
User avatar
tsb
Member
Posts: 2616
Joined: Wed. Jul. 30, 2008 8:38 pm
Location: Douglassville, Pa
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II
Baseburners & Antiques: Grander Golden Oak , Glenwood # 6
Coal Size/Type: All of them

Post by tsb » Fri. Sep. 30, 2011 7:07 pm

They gave a tour for forum members and they have a first class
processing plant. I have not tried their coal, but I would assume
it would be sized properly and clean. If your picking up yourself,
they are probably the closest to you.

 
User avatar
Darren L
Member
Posts: 78
Joined: Sun. Feb. 13, 2011 9:52 am
Location: Douglassville,Pa
Hot Air Coal Stoker Furnace: Leisure Line
Coal Size/Type: Rice
Contact:

Post by Darren L » Sat. Oct. 01, 2011 8:38 am

thanks just got few bags from Pottstown Roller Mills can't wait to fire my new stoker up.

 
User avatar
tsb
Member
Posts: 2616
Joined: Wed. Jul. 30, 2008 8:38 pm
Location: Douglassville, Pa
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II
Baseburners & Antiques: Grander Golden Oak , Glenwood # 6
Coal Size/Type: All of them

Post by tsb » Sat. Jan. 26, 2013 9:22 pm

I got 6.25 tons of Direnzo rice coal delivered by Mud's of Port Clinton.
It is really nice coal. The ash is clean and crunchy with almost no
unburned coal. The flame is a very hot and yellow with no fines
blowing out all the time. The price was a little higher than last year,
but worth it. I believe they have plenty of stock.

My load from Blaschak last year was awful. I though my stoker was
being pissy all year, but it turned out to be the crappy coal. There
were times that I ran the ash through twice to see if I could use the
unburned coal. I won't get it again.

 
User avatar
Joeski
Member
Posts: 233
Joined: Sun. Nov. 14, 2010 12:01 am
Location: Collegeville & Stroudsburg, Pa

Post by Joeski » Sun. Jan. 27, 2013 12:11 am

tsb wrote:I got 6.25 tons of Direnzo rice coal delivered by Mud's of Port Clinton.
It is really nice coal. The ash is clean and crunchy with almost no
unburned coal. The flame is a very hot and yellow with no fines
blowing out all the time. The price was a little higher than last year,
but worth it. I believe they have plenty of stock.

My load from Blaschak last year was awful. I though my stoker was
being pissy all year, but it turned out to be the crappy coal. There
were times that I ran the ash through twice to see if I could use the
unburned coal.How do you go about doing that because since I'm a newbie I'd like to try that but only in the spring when I'm not dealing with single digits. I won't get it again.

 
User avatar
Dennis
Member
Posts: 1082
Joined: Sun. Oct. 30, 2011 5:44 pm
Location: Pottstown,Pa
Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
Coal Size/Type: Anthracite/stove size

Post by Dennis » Sun. Jan. 27, 2013 8:25 am

I'm just 10 miles south/east of you,I'm looking for a new supplier and picked up 600 lbs-50%/50% nut and stove of Blaschak seems and seems ok,much easier than shaking UAE.How much was the coal you got

 
User avatar
Wiz
Member
Posts: 926
Joined: Sun. Nov. 27, 2011 8:45 pm
Location: Tannersville Pa
Stoker Coal Boiler: Keystoker Ka 6
Coal Size/Type: Casey Junk Coal :(

Post by Wiz » Sun. Jan. 27, 2013 9:17 pm

Joeski wrote:
tsb wrote:I got 6.25 tons of Direnzo rice coal delivered by Mud's of Port Clinton.
It is really nice coal. The ash is clean and crunchy with almost no
unburned coal. The flame is a very hot and yellow with no fines
blowing out all the time. The price was a little higher than last year,
but worth it. I believe they have plenty of stock.

My load from Blaschak last year was awful. I though my stoker was
being pissy all year, but it turned out to be the crappy coal. There
were times that I ran the ash through twice to see if I could use the
unburned coal.How do you go about doing that because since I'm a newbie I'd like to try that but only in the spring when I'm not dealing with single digits. I won't get it again.
Joe...it's more of a pain in the butt then its worth. Make yourself a wire screen box, screen to be sized little smaller then your coal. Dump ash on screen and start panning for unburnt black diamonds.


 
User avatar
Joeski
Member
Posts: 233
Joined: Sun. Nov. 14, 2010 12:01 am
Location: Collegeville & Stroudsburg, Pa

Post by Joeski » Sun. Jan. 27, 2013 11:45 pm

Wiz wrote:
Joeski wrote:
Joe...it's more of a pain in the butt then its worth. Make yourself a wire screen box, screen to be sized little smaller then your coal. Dump ash on screen and start panning for unburnt black diamonds.
Thanks Wiz. I don't know if I could do this all the time but it is worth trying once to see how much I might get and how ( never mind I just got an idea>>> I'll make the boy do it to see if I can get some labor out of him.) Next time I see him playing a video game I'll have him play black diamond panning. :)

 
fifthg
Verified Business Rep.
Posts: 356
Joined: Mon. Aug. 03, 2009 10:11 am
Location: southern anthracite field,Schuylkill County,Pa.
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: warm morning # 500
Baseburners & Antiques: Peninsular Western Hot Blast No.44K and Reading Foundry & Supply Co.

Post by fifthg » Mon. Jan. 28, 2013 7:51 am

dry screening like that,he ought to wear a dust mask

 
User avatar
coalkirk
Member
Posts: 5185
Joined: Wed. May. 17, 2006 8:12 pm
Location: Forest Hill MD
Stoker Coal Boiler: 1981 EFM DF520 retired
Hand Fed Coal Stove: Jotul 507 on standby
Coal Size/Type: Lehigh anthracite/rice coal

Post by coalkirk » Mon. Jan. 28, 2013 8:43 am

Does Direnzo have a mine or are they processing others coal?

 
User avatar
Rob R.
Site Moderator
Posts: 17979
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Mon. Jan. 28, 2013 8:58 am

I believe they buy from various stripping contractors in their area. If you are considering buying some, I'm sure they would be happy to answer your questions.

 
Wanna Bee
Member
Posts: 318
Joined: Thu. Jan. 17, 2013 5:41 pm
Location: You wouldn't believe me if I told ya! Virginville PA

Post by Wanna Bee » Mon. Jan. 28, 2013 9:26 am

Rob R. wrote:I believe they buy from various stripping contractors in their area.
This is the answer that I got from them last time I asked.
I'm currently burning DeRenzo nut and was burning their stove size. Nothing but good things to say about this years supply. Burns strong ,clean, low ash and I have had no problems keeping the house comfy.

 
wcb332
New Member
Posts: 2
Joined: Wed. Oct. 23, 2013 10:24 pm

Post by wcb332 » Wed. Oct. 23, 2013 11:12 pm

I have a Keystoker model 250 warm air furnace and will only burn rice coal from Direnzo Coal Company. Last year the cost was $200 a ton plus a delivery charge if you didn't pick it up yourself ("the price is the same now"' I called today. Before I started using Direnzo I tried 3 different suppliers that I will not use again due to real bad dust issues from one Company and vary poor burn issues ( Both from rice coal that produced RED ASH, causing my furnace to go out a lot. Sure the other 3 Coal Companies I used were20 to 25% cheaper but caused dust issues, problems keeping my furnace operating efficiently and when I switched to Direnzo Coal with my thermostat set at 68 degrees I used much less coal. Sure one might say its more money but then again I've heard of higher prices today. MY OPPINION- The best rice coal in the area regarding every issue I can think of. Most of all it burns cleaner than any other coal I have burned which keeps my furnace problem free. I have my furnace cleaned by a professorial once a year and he even said there was a difference after I switched and asked me where I bought the last coal from.

Best Regards,
wcb332

 
User avatar
MATTHEW D.
Member
Posts: 237
Joined: Tue. Apr. 20, 2010 1:44 pm
Location: Pottsville, Pa.

Post by MATTHEW D. » Thu. Oct. 24, 2013 8:18 am

wcb332 wrote:I have a Keystoker model 250 warm air furnace and will only burn rice coal from Direnzo Coal Company. Last year the cost was $200 a ton plus a delivery charge if you didn't pick it up yourself ("the price is the same now"' I called today. Before I started using Direnzo I tried 3 different suppliers that I will not use again due to real bad dust issues from one Company and vary poor burn issues ( Both from rice coal that produced RED ASH, causing my furnace to go out a lot. Sure the other 3 Coal Companies I used were20 to 25% cheaper but caused dust issues, problems keeping my furnace operating efficiently and when I switched to Direnzo Coal with my thermostat set at 68 degrees I used much less coal. Sure one might say its more money but then again I've heard of higher prices today. MY OPPINION- The best rice coal in the area regarding every issue I can think of. Most of all it burns cleaner than any other coal I have burned which keeps my furnace problem free. I have my furnace cleaned by a professorial once a year and he even said there was a difference after I switched and asked me where I bought the last coal from.

Best Regards,
wcb332
The price is NOT the same as last year. Current price for rice coal at DiRenzo Coal Co. is $180.00/ton. Call DiRenzo Coal directly for current prices 570 544-4743. Thanks

 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Thu. Oct. 24, 2013 10:42 am

Don't be afraid of any sizing or quality issues, then run a first class operation. If price is your sole purchase requirement, then you are missing the entire point. My suggestion is to try a little from elsewhere first, THEN you will appreciate what low ash, high BTU output really is. I never burned UAE, but after 46 years of coal burning I do surely know burn characteristics. Check out Gale Mining also. Excellent quality, great service. If you think blending of coals isn't a good idea, better not drink a glass of OJ, milk, or any other product. Quality and consistency win EVERY SINGLE TIME. :idea: :idea: :idea: :idea: :idea:


Post Reply

Return to “Coal Prices & Quality, Coal Dealer Inquiries & Reviews”