Is There Anywhere in NH to Buy Bituminous Coal

Post Reply
 
mason coal burner
Member
Posts: 797
Joined: Sun. Sep. 27, 2009 12:25 pm
Location: so. nh

Post by mason coal burner » Sun. Feb. 07, 2010 2:20 pm

looking for some bit coal to try in my wood stove. sick of the high price of cord wood.

 
User avatar
rewinder
Member
Posts: 218
Joined: Mon. Aug. 04, 2008 10:34 pm
Location: So NH

Post by rewinder » Sun. Feb. 07, 2010 6:30 pm

Are you sure yu need Bit coal and not anthracite??

 
mason coal burner
Member
Posts: 797
Joined: Sun. Sep. 27, 2009 12:25 pm
Location: so. nh

Post by mason coal burner » Sun. Feb. 07, 2010 6:55 pm

yes burning anthracite in hitzer 82 ul customized to furnace model. not quite getting the job done on colder days. but I just reconfigured my duct work and ran one pipe to nearest register about 6 feet from stove with 8 inch 500 cfm in-line fan. this may do the job. but I also have a large nashua wood stove and a vermont castings vigilent. I have been burning some wood in them its been to cold for the 82 to do the job alone. wood is expensive and in the nashua needs tending every 2-3 hours. this is my first year burning coal and I love the long burn times less mess. less space. I have read a little on here about burning bit coal in fire places and wood stoves like the long burn times and lower costs.


 
User avatar
lowfog01
Member
Posts: 3889
Joined: Sat. Dec. 20, 2008 8:33 am
Location: Springfield, VA
Hand Fed Coal Stove: Mark II & Mark I
Coal Size/Type: nut/pea

Post by lowfog01 » Mon. Feb. 08, 2010 2:45 am

You may want to talk to a local black smith. They maybe using bituminous coal and could direct you to the source. Good luck, Lisa

 
User avatar
Berlin
Member
Posts: 1890
Joined: Thu. Feb. 09, 2006 1:25 pm
Location: Wyoming County NY

Post by Berlin » Mon. Feb. 08, 2010 8:04 pm

there will be next year in plattsburgh ny, i'm not sure how far you might be from there. not that it will do you any good this year, but for next year fyi- probably kentucky lump and stoker.

 
Bigbird48
Member
Posts: 22
Joined: Thu. Jan. 28, 2010 1:20 pm
Location: Central , NH

Post by Bigbird48 » Wed. Feb. 10, 2010 3:25 pm

I haven't heard of anyplace to by that coal, but I would think twice about burning any kind of coal in a wood stove. There just not meant for coal. On the other hand if you had a coal stove you can burn wood as an alternative in that. Think about buying a coal stove and burning anthracite coal, there are quite a few places that sell that.


 
User avatar
Berlin
Member
Posts: 1890
Joined: Thu. Feb. 09, 2006 1:25 pm
Location: Wyoming County NY

Post by Berlin » Sat. Feb. 13, 2010 12:39 am

I have a lot of people that burn lump coal in their woodstove to provide more heat when outside temps are cold and to provide a solid overnight burn. If you have a well-built stove with firebrick it won't hurt it at all unless you overfire it - and then it won't matter if you're burning wood or coal. Obviously any coal, even a good low ash bituminous still has much more ash than wood, so without an ashpan or grate system you're not going to want to burn just coal, unless shoveling ash every other day doesn't bother you.

 
mason coal burner
Member
Posts: 797
Joined: Sun. Sep. 27, 2009 12:25 pm
Location: so. nh

Post by mason coal burner » Sat. Feb. 13, 2010 10:28 pm

i was going to try and get a coal grate like I have seen people on here talk about or at least a combo wood-coal grate I can get one of those in town easy. long burns and more heat is the idea. lump coal is also much cheaper than wood. I like cheaper. my wood stove is lined with fire brick not a problem. just need to find some local.

Post Reply

Return to “Coal Prices & Quality, Coal Dealer Inquiries & Reviews”